SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
HP
A 2.5 inch SATA 6.0Gb/s laptop hard drive with 1TB capacity and 7200 RPM for server use
This HP 655710-B21 is a 1TB laptop internal hard drive spinning at 7200 RPM over a SATA 6.0Gb/s interface. It uses a 2.5-inch form factor with a maximum height of 15.7 mm and is supplied new. The drive is designed for server environments where cost and capacity are priorities.
It suits administrators adding non-mission-critical bulk storage to compatible 2.5-inch bays that accept a 15.7 mm drive height. It is not for buyers who need a thinner drive for slim laptops. It is also not for systems that require a 3.5-inch form factor or an interface other than SATA.
The single specification that determines compatibility is the 15.7 mm maximum height. Verify that the target chassis or drive cage accepts this dimension before purchase.
| Brand | HP |
|---|---|
| Model | 655710-B21 |
| Interface | SATA 6.0Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Features | The HPE SATA Hard Drives increase reliability and lower start-up costs without sacrificing reliability with non-mission critical hard drives at the lowest $/GB. Both cost and capacity optimized solutions provide up to 8 TB of storage in a single device. Available in 2.5-inch Small Form Factor (SFF) and 3.5-inch Large Form Factor (LFF) that are available in a wide variety of capacity points. Rotational Vibration Sensors deliver enhanced rotational vibration tolerance that provides enterprise class reliability in midline drives. 6 Gb/sec data transfer rate supporting existing servers. |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
| Height (maximum) | 15.7 mm |
| Width (maximum) | 75.7 mm |
| Length (maximum) | 118.6 mm |
The drive is supplied as a bare 2.5" SFF unit; any tray, caddy or mounting screws required by your server chassis are sold separately.
This model is the 2.5-inch Small Form Factor version with a 15.7 mm z-height, not the 3.5-inch LFF variant.
The 6.0 Gb/s link sets the bus ceiling; sustained transfer rates are determined by the 7200 RPM platters and will be lower than the interface maximum.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?