SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
HP
A 2.5 inch SATA 6.0Gb/s laptop hard drive with 1TB capacity and 7200 RPM for server use
This HP 655710-B21 is a 1TB laptop internal hard drive spinning at 7200 RPM over a SATA 6.0Gb/s interface. It uses a 2.5-inch form factor with a maximum height of 15.7 mm and is supplied new. The drive is designed for server environments where cost and capacity are priorities.
It suits administrators adding non-mission-critical bulk storage to compatible 2.5-inch bays that accept a 15.7 mm drive height. It is not for buyers who need a thinner drive for slim laptops. It is also not for systems that require a 3.5-inch form factor or an interface other than SATA.
The single specification that determines compatibility is the 15.7 mm maximum height. Verify that the target chassis or drive cage accepts this dimension before purchase.
| Brand | HP |
|---|---|
| Model | 655710-B21 |
| Interface | SATA 6.0Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Features | The HPE SATA Hard Drives increase reliability and lower start-up costs without sacrificing reliability with non-mission critical hard drives at the lowest $/GB. Both cost and capacity optimized solutions provide up to 8 TB of storage in a single device. Available in 2.5-inch Small Form Factor (SFF) and 3.5-inch Large Form Factor (LFF) that are available in a wide variety of capacity points. Rotational Vibration Sensors deliver enhanced rotational vibration tolerance that provides enterprise class reliability in midline drives. 6 Gb/sec data transfer rate supporting existing servers. |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
| Height (maximum) | 15.7 mm |
| Width (maximum) | 75.7 mm |
| Length (maximum) | 118.6 mm |
The drive is supplied as a bare 2.5" SFF unit; any tray, caddy or mounting screws required by your server chassis are sold separately.
This model is the 2.5-inch Small Form Factor version with a 15.7 mm z-height, not the 3.5-inch LFF variant.
The 6.0 Gb/s link sets the bus ceiling; sustained transfer rates are determined by the 7200 RPM platters and will be lower than the interface maximum.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?