Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Light green filament spool, 1.75mm diameter, .25kg weight

Lay Filaments

Lay Filaments PLA-Y-Soft 1.75mm .25kg 3D printer filament

SKU CH-F3VH-XJD49

Soft PLA filament prints at 225–240 °C on a cold bed with low warp and high bioplastic content

  • Soft PLA prints on a cold bed with low warp
  • High bioplastic content makes the filament renewable and biodegradable
  • Extrudes at 225-240 °C without a heated chamber
  • 75 mm diameter fits most desktop 3D printers
  • Compact 0.25 kg spool suits test prints and small projects

Soft PLA filament for everyday printing

This 1.75 mm polylactic acid spool suits hobbyists and makers who want reliable results without a heated bed. The material prints at modest temperatures and resists warping on cold surfaces, making it practical for open-frame printers and quick prototypes. Its high bioplastic content also appeals to users who prefer renewable, biodegradable feedstock.

Diameter 1.75 mm fits standard direct-drive

The filament is manufactured to a consistent 1.75 mm cross-section so it feeds smoothly through common hot-ends without jamming or grinding. No special hardware or firmware changes are required; it works with the default settings on most desktop FDM machines that accept 1.75 mm stock.

Prints steadily at 225-240 °C with minimal warping

At these nozzle temperatures the material maintains stable flow during long builds, reducing the risk of layer separation or corner lift that can ruin tall parts. The low-warp formulation keeps the first layers flat on an unheated bed, so extended prints finish cleanly without constant monitoring.

Privalumai

  • Soft PLA prints on a cold bed with low warp
  • High bioplastic content makes the filament renewable and biodegradable
  • Extrudes at 225-240 °C without a heated chamber
  • 75 mm diameter fits most desktop 3D printers
  • Compact 0.25 kg spool suits test prints and small projects

Specifikacijos

BrandLay Filaments

Klausimai apie šią prekę

How much filament is on the .25 kg spool?

The spool holds a quarter-kilogram of PLA-Y-Soft, enough for several small prints or one medium-sized model.

What nozzle temperature range does PLA-Y-Soft need?

Print between 225 °C and 240 °C; the material flows well in that window without requiring an all-metal hot-end.

Will the 1.75 mm diameter fit my printer?

Yes, 1.75 mm is the standard size for most desktop FDM printers; just confirm your extruder accepts that diameter.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.