Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Light green filament spool, 1.75mm diameter, .25kg weight

Lay Filaments

Lay Filaments PLA-Y-Soft 1.75mm .25kg 3D printer filament

SKU CH-F3VH-XJD49

Soft PLA filament prints at 225–240 °C on a cold bed with low warp and high bioplastic content

  • Soft PLA prints on a cold bed with low warp
  • High bioplastic content makes the filament renewable and biodegradable
  • Extrudes at 225-240 °C without a heated chamber
  • 75 mm diameter fits most desktop 3D printers
  • Compact 0.25 kg spool suits test prints and small projects

Soft PLA filament for everyday printing

This 1.75 mm polylactic acid spool suits hobbyists and makers who want reliable results without a heated bed. The material prints at modest temperatures and resists warping on cold surfaces, making it practical for open-frame printers and quick prototypes. Its high bioplastic content also appeals to users who prefer renewable, biodegradable feedstock.

Diameter 1.75 mm fits standard direct-drive

The filament is manufactured to a consistent 1.75 mm cross-section so it feeds smoothly through common hot-ends without jamming or grinding. No special hardware or firmware changes are required; it works with the default settings on most desktop FDM machines that accept 1.75 mm stock.

Prints steadily at 225-240 °C with minimal warping

At these nozzle temperatures the material maintains stable flow during long builds, reducing the risk of layer separation or corner lift that can ruin tall parts. The low-warp formulation keeps the first layers flat on an unheated bed, so extended prints finish cleanly without constant monitoring.

Pluspunten

  • Soft PLA prints on a cold bed with low warp
  • High bioplastic content makes the filament renewable and biodegradable
  • Extrudes at 225-240 °C without a heated chamber
  • 75 mm diameter fits most desktop 3D printers
  • Compact 0.25 kg spool suits test prints and small projects

Specificaties

BrandLay Filaments

Vragen over dit artikel

How much filament is on the .25 kg spool?

The spool holds a quarter-kilogram of PLA-Y-Soft, enough for several small prints or one medium-sized model.

What nozzle temperature range does PLA-Y-Soft need?

Print between 225 °C and 240 °C; the material flows well in that window without requiring an all-metal hot-end.

Will the 1.75 mm diameter fit my printer?

Yes, 1.75 mm is the standard size for most desktop FDM printers; just confirm your extruder accepts that diameter.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.