暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Light green filament spool, 1.75mm diameter, .25kg weight

Lay Filaments

Lay Filaments PLA-Y-Soft 1.75mm .25kg 3D printer filament

SKU CH-F3VH-XJD49

Soft PLA filament prints at 225–240 °C on a cold bed with low warp and high bioplastic content

  • Soft PLA prints on a cold bed with low warp
  • High bioplastic content makes the filament renewable and biodegradable
  • Extrudes at 225-240 °C without a heated chamber
  • 75 mm diameter fits most desktop 3D printers
  • Compact 0.25 kg spool suits test prints and small projects

Soft PLA filament for everyday printing

This 1.75 mm polylactic acid spool suits hobbyists and makers who want reliable results without a heated bed. The material prints at modest temperatures and resists warping on cold surfaces, making it practical for open-frame printers and quick prototypes. Its high bioplastic content also appeals to users who prefer renewable, biodegradable feedstock.

Diameter 1.75 mm fits standard direct-drive

The filament is manufactured to a consistent 1.75 mm cross-section so it feeds smoothly through common hot-ends without jamming or grinding. No special hardware or firmware changes are required; it works with the default settings on most desktop FDM machines that accept 1.75 mm stock.

Prints steadily at 225-240 °C with minimal warping

At these nozzle temperatures the material maintains stable flow during long builds, reducing the risk of layer separation or corner lift that can ruin tall parts. The low-warp formulation keeps the first layers flat on an unheated bed, so extended prints finish cleanly without constant monitoring.

特長

  • Soft PLA prints on a cold bed with low warp
  • High bioplastic content makes the filament renewable and biodegradable
  • Extrudes at 225-240 °C without a heated chamber
  • 75 mm diameter fits most desktop 3D printers
  • Compact 0.25 kg spool suits test prints and small projects

仕様

BrandLay Filaments

この商品に関する質問

How much filament is on the .25 kg spool?

The spool holds a quarter-kilogram of PLA-Y-Soft, enough for several small prints or one medium-sized model.

What nozzle temperature range does PLA-Y-Soft need?

Print between 225 °C and 240 °C; the material flows well in that window without requiring an all-metal hot-end.

Will the 1.75 mm diameter fit my printer?

Yes, 1.75 mm is the standard size for most desktop FDM printers; just confirm your extruder accepts that diameter.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。