نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Light green filament spool, 1.75mm diameter, .25kg weight

Lay Filaments

Lay Filaments PLA-Y-Soft 1.75mm .25kg 3D printer filament

SKU CH-F3VH-XJD49

Soft PLA filament prints at 225–240 °C on a cold bed with low warp and high bioplastic content

  • Soft PLA prints on a cold bed with low warp
  • High bioplastic content makes the filament renewable and biodegradable
  • Extrudes at 225-240 °C without a heated chamber
  • 75 mm diameter fits most desktop 3D printers
  • Compact 0.25 kg spool suits test prints and small projects

Soft PLA filament for everyday printing

This 1.75 mm polylactic acid spool suits hobbyists and makers who want reliable results without a heated bed. The material prints at modest temperatures and resists warping on cold surfaces, making it practical for open-frame printers and quick prototypes. Its high bioplastic content also appeals to users who prefer renewable, biodegradable feedstock.

Diameter 1.75 mm fits standard direct-drive

The filament is manufactured to a consistent 1.75 mm cross-section so it feeds smoothly through common hot-ends without jamming or grinding. No special hardware or firmware changes are required; it works with the default settings on most desktop FDM machines that accept 1.75 mm stock.

Prints steadily at 225-240 °C with minimal warping

At these nozzle temperatures the material maintains stable flow during long builds, reducing the risk of layer separation or corner lift that can ruin tall parts. The low-warp formulation keeps the first layers flat on an unheated bed, so extended prints finish cleanly without constant monitoring.

أبرز المميزات

  • Soft PLA prints on a cold bed with low warp
  • High bioplastic content makes the filament renewable and biodegradable
  • Extrudes at 225-240 °C without a heated chamber
  • 75 mm diameter fits most desktop 3D printers
  • Compact 0.25 kg spool suits test prints and small projects

المواصفات

BrandLay Filaments

أسئلة حول هذا المنتج

How much filament is on the .25 kg spool?

The spool holds a quarter-kilogram of PLA-Y-Soft, enough for several small prints or one medium-sized model.

What nozzle temperature range does PLA-Y-Soft need?

Print between 225 °C and 240 °C; the material flows well in that window without requiring an all-metal hot-end.

Will the 1.75 mm diameter fit my printer?

Yes, 1.75 mm is the standard size for most desktop FDM printers; just confirm your extruder accepts that diameter.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.