Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black 40mm square cooling fan with two wires and a two-pin connector

OEM Industries

OEM Industries KF0410B2H-R 40mm 24V 1.2W 2-pin fan

SKU CH-AEM7-N97VR

40 mm ball-bearing fan runs on 24 V and draws 1.2 W for compact server or inverter cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • Compact 40 mm footprint fits tight server bays
  • Ball bearing ensures long service life
  • 24 V 1.2 W draw keeps power budget low
  • Two-pin connector simplifies wiring
  • No LED avoids unwanted light in racks

Jamicon 40mm micro server fan

The Jamicon KF0410B2H-R is a 40 by 10 millimetre axial fan built for 24 volt server and inverter chassis. It draws 1.2 watts through a two pin connector and uses a ball bearing for continuous duty in compact rack environments.

Replaces noisy 40mm sleeve bearing fans

Swapping a worn sleeve bearing unit for this ball bearing model removes rattling and extends service life in always on infrastructure. The upgrade is worth it when the existing fan develops vibration or fails to spin at full speed under load.

Two pin plug fits standard headers

Installation requires matching the red and black leads to the board header; reversing polarity will stop the motor. The 10 millimetre thickness fits most 40mm mounts but verify clearance against tall heatsinks or cable looms before securing the screws.

Privalumai

  • Compact 40 mm footprint fits tight server bays
  • Ball bearing ensures long service life
  • 24 V 1.2 W draw keeps power budget low
  • Two-pin connector simplifies wiring
  • No LED avoids unwanted light in racks

Specifikacijos

ModelKF0410B2H-R
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

Klausimai apie šią prekę

Will the 40 mm by 10 mm frame fit my server cooler slot?

The fan measures 40 mm square and 10 mm thick, so it fits any standard 40 mm mounting pattern.

How do I connect the 2-pin 24 V lead without reversing polarity?

Align the red wire to the positive pin and the black wire to the negative pin on the 2-pin header; the connector is keyed to prevent reverse insertion.

When should I plan to replace the ball-bearing fan?

Ball bearings typically run for tens of thousands of hours; replace the fan if noise increases or airflow drops noticeably.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.