暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black 40mm square cooling fan with two wires and a two-pin connector

OEM Industries

OEM Industries KF0410B2H-R 40mm 24V 1.2W 2-pin fan

SKU CH-AEM7-N97VR

40 mm ball-bearing fan runs on 24 V and draws 1.2 W for compact server or inverter cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • Compact 40 mm footprint fits tight server bays
  • Ball bearing ensures long service life
  • 24 V 1.2 W draw keeps power budget low
  • Two-pin connector simplifies wiring
  • No LED avoids unwanted light in racks

Jamicon 40mm micro server fan

The Jamicon KF0410B2H-R is a 40 by 10 millimetre axial fan built for 24 volt server and inverter chassis. It draws 1.2 watts through a two pin connector and uses a ball bearing for continuous duty in compact rack environments.

Replaces noisy 40mm sleeve bearing fans

Swapping a worn sleeve bearing unit for this ball bearing model removes rattling and extends service life in always on infrastructure. The upgrade is worth it when the existing fan develops vibration or fails to spin at full speed under load.

Two pin plug fits standard headers

Installation requires matching the red and black leads to the board header; reversing polarity will stop the motor. The 10 millimetre thickness fits most 40mm mounts but verify clearance against tall heatsinks or cable looms before securing the screws.

特長

  • Compact 40 mm footprint fits tight server bays
  • Ball bearing ensures long service life
  • 24 V 1.2 W draw keeps power budget low
  • Two-pin connector simplifies wiring
  • No LED avoids unwanted light in racks

仕様

ModelKF0410B2H-R
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

この商品に関する質問

Will the 40 mm by 10 mm frame fit my server cooler slot?

The fan measures 40 mm square and 10 mm thick, so it fits any standard 40 mm mounting pattern.

How do I connect the 2-pin 24 V lead without reversing polarity?

Align the red wire to the positive pin and the black wire to the negative pin on the 2-pin header; the connector is keyed to prevent reverse insertion.

When should I plan to replace the ball-bearing fan?

Ball bearings typically run for tens of thousands of hours; replace the fan if noise increases or airflow drops noticeably.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。