Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small black 40mm square cooling fan with two wires and a two-pin connector

OEM Industries

OEM Industries KF0410B2H-R 40mm 24V 1.2W 2-pin fan

SKU CH-AEM7-N97VR

40 mm ball-bearing fan runs on 24 V and draws 1.2 W for compact server or inverter cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • Compact 40 mm footprint fits tight server bays
  • Ball bearing ensures long service life
  • 24 V 1.2 W draw keeps power budget low
  • Two-pin connector simplifies wiring
  • No LED avoids unwanted light in racks

Jamicon 40mm micro server fan

The Jamicon KF0410B2H-R is a 40 by 10 millimetre axial fan built for 24 volt server and inverter chassis. It draws 1.2 watts through a two pin connector and uses a ball bearing for continuous duty in compact rack environments.

Replaces noisy 40mm sleeve bearing fans

Swapping a worn sleeve bearing unit for this ball bearing model removes rattling and extends service life in always on infrastructure. The upgrade is worth it when the existing fan develops vibration or fails to spin at full speed under load.

Two pin plug fits standard headers

Installation requires matching the red and black leads to the board header; reversing polarity will stop the motor. The 10 millimetre thickness fits most 40mm mounts but verify clearance against tall heatsinks or cable looms before securing the screws.

Puncte forte

  • Compact 40 mm footprint fits tight server bays
  • Ball bearing ensures long service life
  • 24 V 1.2 W draw keeps power budget low
  • Two-pin connector simplifies wiring
  • No LED avoids unwanted light in racks

Specificații

ModelKF0410B2H-R
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

Întrebări despre acest articol

Will the 40 mm by 10 mm frame fit my server cooler slot?

The fan measures 40 mm square and 10 mm thick, so it fits any standard 40 mm mounting pattern.

How do I connect the 2-pin 24 V lead without reversing polarity?

Align the red wire to the positive pin and the black wire to the negative pin on the 2-pin header; the connector is keyed to prevent reverse insertion.

When should I plan to replace the ball-bearing fan?

Ball bearings typically run for tens of thousands of hours; replace the fan if noise increases or airflow drops noticeably.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.