Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small black 40mm square cooling fan with two wires and a two-pin connector

OEM Industries

OEM Industries KF0410B2H-R 40mm 24V 1.2W 2-pin fan

SKU CH-AEM7-N97VR

40 mm ball-bearing fan runs on 24 V and draws 1.2 W for compact server or inverter cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • Compact 40 mm footprint fits tight server bays
  • Ball bearing ensures long service life
  • 24 V 1.2 W draw keeps power budget low
  • Two-pin connector simplifies wiring
  • No LED avoids unwanted light in racks

Jamicon 40mm micro server fan

The Jamicon KF0410B2H-R is a 40 by 10 millimetre axial fan built for 24 volt server and inverter chassis. It draws 1.2 watts through a two pin connector and uses a ball bearing for continuous duty in compact rack environments.

Replaces noisy 40mm sleeve bearing fans

Swapping a worn sleeve bearing unit for this ball bearing model removes rattling and extends service life in always on infrastructure. The upgrade is worth it when the existing fan develops vibration or fails to spin at full speed under load.

Two pin plug fits standard headers

Installation requires matching the red and black leads to the board header; reversing polarity will stop the motor. The 10 millimetre thickness fits most 40mm mounts but verify clearance against tall heatsinks or cable looms before securing the screws.

Pluspunten

  • Compact 40 mm footprint fits tight server bays
  • Ball bearing ensures long service life
  • 24 V 1.2 W draw keeps power budget low
  • Two-pin connector simplifies wiring
  • No LED avoids unwanted light in racks

Specificaties

ModelKF0410B2H-R
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

Vragen over dit artikel

Will the 40 mm by 10 mm frame fit my server cooler slot?

The fan measures 40 mm square and 10 mm thick, so it fits any standard 40 mm mounting pattern.

How do I connect the 2-pin 24 V lead without reversing polarity?

Align the red wire to the positive pin and the black wire to the negative pin on the 2-pin header; the connector is keyed to prevent reverse insertion.

When should I plan to replace the ball-bearing fan?

Ball bearings typically run for tens of thousands of hours; replace the fan if noise increases or airflow drops noticeably.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.