Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small brass fitting in candy purple with male and female G1/4 threads, 30 degree rotary elbow shape

PrimoChill

PrimoChill G1/4 30 Degree Rotary Elbow Fitting Candy Purple

SKU CH-8TRF-N82BP

A candy-purple coated-brass rotary elbow redirects tubing 30 degrees from the mount with male and female G1/4 threads

  • TypeFittings

Option Candy Purple

Rodyti 10 daugiau konfigūracijų

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

  • Redirects tubing runs at unconventional angles with 30-degree directional offset
  • Rotary function aims connection in any direction 30 degrees from mount
  • Coated brass construction provides durability for custom loops
  • Male and female G1/4 threads enable flexible loop integration
  • US-based brand with 20-year history in water-cooling components

Candy Purple Rotary Elbow Fitting

The PrimoChill G1/4 30 Degree Rotary Elbow Fitting in Candy Purple redirects tubing runs by a fixed thirty-degree angle. Its rotary base lets the male thread swivel to face any direction before tightening. Coated brass construction provides corrosion resistance for custom liquid-cooling loops.

For builders needing a shallow directional change

Suits loops where tubing must clear a component or motherboard heatsink at a gentle angle. Not for loops that require a sharper turn or a straight pass-through connection. The single male-to-female G1/4 thread pair fits standard water-blocks, radiators and reservoirs without adapters.

Fixed thirty-degree offset with full rotation

The defining specification is the thirty-degree bend combined with a freely rotating male thread. This allows the outlet to be clocked to any radial position while maintaining the set angle, letting you route tubing precisely around tight clearances.

Privalumai

  • Redirects tubing runs at unconventional angles with 30-degree directional offset
  • Rotary function aims connection in any direction 30 degrees from mount
  • Coated brass construction provides durability for custom loops
  • Male and female G1/4 threads enable flexible loop integration
  • US-based brand with 20-year history in water-cooling components

Specifikacijos

TypeFittings

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How do I install the G1/4 rotary elbow and what step do people get wrong?

Screw the male G1/4 thread into the component port, then rotate the female end to the desired 30-degree angle before tightening the tubing fitting. People often forget to set the angle first, then struggle to reposition it after the tubing is secured.

What maintenance or replacement will this fitting need later?

The coated brass body resists corrosion, but the internal O-rings can dry out over time. Inspect them during routine loop maintenance and replace if they show cracking or flattening to prevent leaks.

What limit shows up first under sustained use?

The 30-degree fixed offset restricts how sharply you can redirect the tubing run. If your layout demands a tighter bend, this fitting will not provide enough angle and you will need a different elbow.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.