Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small brass fitting in candy purple with male and female G1/4 threads, 30 degree rotary elbow shape

PrimoChill

PrimoChill G1/4 30 Degree Rotary Elbow Fitting Candy Purple

SKU CH-8TRF-N82BP

A candy-purple coated-brass rotary elbow redirects tubing 30 degrees from the mount with male and female G1/4 threads

  • TypeFittings

Option Candy Purple

Näytä 10 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Redirects tubing runs at unconventional angles with 30-degree directional offset
  • Rotary function aims connection in any direction 30 degrees from mount
  • Coated brass construction provides durability for custom loops
  • Male and female G1/4 threads enable flexible loop integration
  • US-based brand with 20-year history in water-cooling components

Candy Purple Rotary Elbow Fitting

The PrimoChill G1/4 30 Degree Rotary Elbow Fitting in Candy Purple redirects tubing runs by a fixed thirty-degree angle. Its rotary base lets the male thread swivel to face any direction before tightening. Coated brass construction provides corrosion resistance for custom liquid-cooling loops.

For builders needing a shallow directional change

Suits loops where tubing must clear a component or motherboard heatsink at a gentle angle. Not for loops that require a sharper turn or a straight pass-through connection. The single male-to-female G1/4 thread pair fits standard water-blocks, radiators and reservoirs without adapters.

Fixed thirty-degree offset with full rotation

The defining specification is the thirty-degree bend combined with a freely rotating male thread. This allows the outlet to be clocked to any radial position while maintaining the set angle, letting you route tubing precisely around tight clearances.

Kohokohdat

  • Redirects tubing runs at unconventional angles with 30-degree directional offset
  • Rotary function aims connection in any direction 30 degrees from mount
  • Coated brass construction provides durability for custom loops
  • Male and female G1/4 threads enable flexible loop integration
  • US-based brand with 20-year history in water-cooling components

Tekniset tiedot

TypeFittings

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the G1/4 rotary elbow and what step do people get wrong?

Screw the male G1/4 thread into the component port, then rotate the female end to the desired 30-degree angle before tightening the tubing fitting. People often forget to set the angle first, then struggle to reposition it after the tubing is secured.

What maintenance or replacement will this fitting need later?

The coated brass body resists corrosion, but the internal O-rings can dry out over time. Inspect them during routine loop maintenance and replace if they show cracking or flattening to prevent leaks.

What limit shows up first under sustained use?

The 30-degree fixed offset restricts how sharply you can redirect the tubing run. If your layout demands a tighter bend, this fitting will not provide enough angle and you will need a different elbow.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.