暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small brass fitting in candy purple with male and female G1/4 threads, 30 degree rotary elbow shape

PrimoChill

PrimoChill G1/4 30 Degree Rotary Elbow Fitting Candy Purple

SKU CH-8TRF-N82BP

A candy-purple coated-brass rotary elbow redirects tubing 30 degrees from the mount with male and female G1/4 threads

  • TypeFittings

Option Candy Purple

他に 10点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Redirects tubing runs at unconventional angles with 30-degree directional offset
  • Rotary function aims connection in any direction 30 degrees from mount
  • Coated brass construction provides durability for custom loops
  • Male and female G1/4 threads enable flexible loop integration
  • US-based brand with 20-year history in water-cooling components

Candy Purple Rotary Elbow Fitting

The PrimoChill G1/4 30 Degree Rotary Elbow Fitting in Candy Purple redirects tubing runs by a fixed thirty-degree angle. Its rotary base lets the male thread swivel to face any direction before tightening. Coated brass construction provides corrosion resistance for custom liquid-cooling loops.

For builders needing a shallow directional change

Suits loops where tubing must clear a component or motherboard heatsink at a gentle angle. Not for loops that require a sharper turn or a straight pass-through connection. The single male-to-female G1/4 thread pair fits standard water-blocks, radiators and reservoirs without adapters.

Fixed thirty-degree offset with full rotation

The defining specification is the thirty-degree bend combined with a freely rotating male thread. This allows the outlet to be clocked to any radial position while maintaining the set angle, letting you route tubing precisely around tight clearances.

特長

  • Redirects tubing runs at unconventional angles with 30-degree directional offset
  • Rotary function aims connection in any direction 30 degrees from mount
  • Coated brass construction provides durability for custom loops
  • Male and female G1/4 threads enable flexible loop integration
  • US-based brand with 20-year history in water-cooling components

仕様

TypeFittings

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the G1/4 rotary elbow and what step do people get wrong?

Screw the male G1/4 thread into the component port, then rotate the female end to the desired 30-degree angle before tightening the tubing fitting. People often forget to set the angle first, then struggle to reposition it after the tubing is secured.

What maintenance or replacement will this fitting need later?

The coated brass body resists corrosion, but the internal O-rings can dry out over time. Inspect them during routine loop maintenance and replace if they show cracking or flattening to prevent leaks.

What limit shows up first under sustained use?

The 30-degree fixed offset restricts how sharply you can redirect the tubing run. If your layout demands a tighter bend, this fitting will not provide enough angle and you will need a different elbow.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。