暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Brass 45-degree rotary elbow fitting with male and female G 1/4 threads

PrimoChill

PrimoChill Male to Female G 1/4in 45 Degree SX Rotary Elbow Fitting diy cooling

SKU CH-CEM0-MXRJD

A 45-degree rotary elbow fitting redirects custom-loop tubing with male and female G 1/4 threads in coated brass

  • TypeCPU Block

Option Silver Nickel

他に 10点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Redirects tubing runs at unconventional angles with 45-degree elbow
  • Rotary joint lets you aim the connection in any direction
  • Coated brass construction resists corrosion in liquid-cooling loops
  • Standard G 1/4 male and female threads fit common water-cooling parts
  • Installed O-ring on male side provides immediate seal

45 Degree Rotary Elbow for Custom Loops

The PrimoChill Male to Female G 1/4in 45 Degree SX Rotary Elbow Fitting is a coated brass adapter designed for custom liquid cooling loops. It connects a male G 1/4 thread to a female G 1/4 thread while angling the path 45 degrees from the mounting point. The rotary joint allows the female end to be aimed in any direction before tightening. This makes it easier to route tubing around tight component clearances without sharp bends.

Builders Needing Angular Flexibility

This fitting suits builders who must change tubing direction at unconventional angles and want the freedom to orient the connection precisely. The rotary mechanism simplifies alignment during assembly. Buyers who require a straight in-line connection or a different angle should consider other fitting types. The manufacturer notes that rotary joints can occasionally dislodge after movement, so users uncomfortable with periodic reseating and leak testing may prefer fixed elbows.

45 Degree Fixed Angle Constraint

The single specification that decides fit is the 45 degree bend angle combined with male-to-female G 1/4 threading. The angle is not adjustable beyond the rotary orientation, so the loop design must accommodate this specific deflection. Verify that your block, radiator or reservoir ports accept G 1/4 threads and that a 45 degree offset matches your planned tubing run before purchasing.

特長

  • Redirects tubing runs at unconventional angles with 45-degree elbow
  • Rotary joint lets you aim the connection in any direction
  • Coated brass construction resists corrosion in liquid-cooling loops
  • Standard G 1/4 male and female threads fit common water-cooling parts
  • Installed O-ring on male side provides immediate seal

仕様

TypeCPU Block

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What thread size does the male end of this PrimoChill rotary elbow use?

The male side uses a G 1/4 thread with an installed O-ring, matching standard water-cooling fittings.

How do I set the 45-degree angle before tightening the fitting into my block?

Rotate the elbow to the desired orientation first, then tighten the male thread; the rotary joint holds the angle once secured.

What should I do if the rotary joint loosens and the seal disengages after repositioning?

Remove the fitting, press the joints together while rotating them, then pressure-test the loop before powering on.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。