Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small brass fitting in candy purple with male and female G1/4 threads, 30 degree rotary elbow shape

PrimoChill

PrimoChill G1/4 30 Degree Rotary Elbow Fitting Candy Purple

SKU CH-8TRF-N82BP

A candy-purple coated-brass rotary elbow redirects tubing 30 degrees from the mount with male and female G1/4 threads

  • TypeFittings

Option Candy Purple

Skatīt vēl 10 konfigurācijas

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Redirects tubing runs at unconventional angles with 30-degree directional offset
  • Rotary function aims connection in any direction 30 degrees from mount
  • Coated brass construction provides durability for custom loops
  • Male and female G1/4 threads enable flexible loop integration
  • US-based brand with 20-year history in water-cooling components

Candy Purple Rotary Elbow Fitting

The PrimoChill G1/4 30 Degree Rotary Elbow Fitting in Candy Purple redirects tubing runs by a fixed thirty-degree angle. Its rotary base lets the male thread swivel to face any direction before tightening. Coated brass construction provides corrosion resistance for custom liquid-cooling loops.

For builders needing a shallow directional change

Suits loops where tubing must clear a component or motherboard heatsink at a gentle angle. Not for loops that require a sharper turn or a straight pass-through connection. The single male-to-female G1/4 thread pair fits standard water-blocks, radiators and reservoirs without adapters.

Fixed thirty-degree offset with full rotation

The defining specification is the thirty-degree bend combined with a freely rotating male thread. This allows the outlet to be clocked to any radial position while maintaining the set angle, letting you route tubing precisely around tight clearances.

Priekšrocības

  • Redirects tubing runs at unconventional angles with 30-degree directional offset
  • Rotary function aims connection in any direction 30 degrees from mount
  • Coated brass construction provides durability for custom loops
  • Male and female G1/4 threads enable flexible loop integration
  • US-based brand with 20-year history in water-cooling components

Specifikācijas

TypeFittings

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the G1/4 rotary elbow and what step do people get wrong?

Screw the male G1/4 thread into the component port, then rotate the female end to the desired 30-degree angle before tightening the tubing fitting. People often forget to set the angle first, then struggle to reposition it after the tubing is secured.

What maintenance or replacement will this fitting need later?

The coated brass body resists corrosion, but the internal O-rings can dry out over time. Inspect them during routine loop maintenance and replace if they show cracking or flattening to prevent leaks.

What limit shows up first under sustained use?

The 30-degree fixed offset restricts how sharply you can redirect the tubing run. If your layout demands a tighter bend, this fitting will not provide enough angle and you will need a different elbow.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.