Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Blue brass 90 degree rotary elbow fitting with 20mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow - True Blue

SKU CH-9A7N-BYYY4

A G1/4 rotary elbow that redirects tubing 90 degrees with a 20 mm extension and 360-degree adjustment

  • TypeFittings

Option True Blue

Rodyti 9 daugiau konfigūracijų

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

  • Rotary design lets you aim any direction with 360-degree swivel
  • 90-degree elbow redirects tubing runs around tight corners
  • 20mm extension adds clearance for crowded component layouts
  • Brass construction with SX powder coat resists corrosion in blue finish
  • G1/4 threads install directly into standard water-cooling ports

G1/4 90° rotary extension elbow

The PrimoChill G1/4 90° rotary extension elbow is a brass fitting designed for custom liquid-cooling loops. It provides a 90-degree turn with a 20mm extension and full 360-degree rotary adjustment for precise alignment. The SX powder-coated finish adds corrosion resistance and a consistent True Blue colour. It connects standard G1/4 threaded components in tight spaces.

Builders needing directional flexibility

This fitting suits builders who must route tubing around obstacles or align ports at unconventional angles within a custom loop. The rotary base allows the elbow to be oriented after installation without stressing connected components. It is not intended for users seeking a simple straight coupler or a fixed-angle elbow without extension height. Buyers who need a different thread standard should look elsewhere.

Verify G1/4 thread compatibility and clearance

Confirm that all mating components use G1/4 threads before ordering. The installed base height measures 20mm and total height reaches 43mm, so check available space around the port to ensure the elbow and tubing can sit without interference. The thread depth is 5mm; ensure the female port accepts this engagement length. Inspect the loop layout to confirm the 90-degree orientation matches the required tubing path.

Privalumai

  • Rotary design lets you aim any direction with 360-degree swivel
  • 90-degree elbow redirects tubing runs around tight corners
  • 20mm extension adds clearance for crowded component layouts
  • Brass construction with SX powder coat resists corrosion in blue finish
  • G1/4 threads install directly into standard water-cooling ports

Specifikacijos

TypeFittings

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Does my loop need G1/4 threads to use this fitting?

Yes, it connects to any component or block with standard G1/4 threads.

Will the 360-degree rotary let me align the 90° elbow around my existing GPU block?

The rotary base spins freely so you can orient the 20 mm offset in any direction before tightening.

How do I confirm the 20 mm extension is seated correctly after install?

Measure from the mounting face to the female port — it should sit 20 mm out with the total height reaching 43 mm.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.