Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Blue brass 90 degree rotary elbow fitting with 20mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow - True Blue

SKU CH-9A7N-BYYY4

A G1/4 rotary elbow that redirects tubing 90 degrees with a 20 mm extension and 360-degree adjustment

  • TypeFittings

Option True Blue

Zobraziť ďalších 9 konfigurácií

Preškrtnuté verzie existujú, ale nie sú tu skladom.

  • Rotary design lets you aim any direction with 360-degree swivel
  • 90-degree elbow redirects tubing runs around tight corners
  • 20mm extension adds clearance for crowded component layouts
  • Brass construction with SX powder coat resists corrosion in blue finish
  • G1/4 threads install directly into standard water-cooling ports

G1/4 90° rotary extension elbow

The PrimoChill G1/4 90° rotary extension elbow is a brass fitting designed for custom liquid-cooling loops. It provides a 90-degree turn with a 20mm extension and full 360-degree rotary adjustment for precise alignment. The SX powder-coated finish adds corrosion resistance and a consistent True Blue colour. It connects standard G1/4 threaded components in tight spaces.

Builders needing directional flexibility

This fitting suits builders who must route tubing around obstacles or align ports at unconventional angles within a custom loop. The rotary base allows the elbow to be oriented after installation without stressing connected components. It is not intended for users seeking a simple straight coupler or a fixed-angle elbow without extension height. Buyers who need a different thread standard should look elsewhere.

Verify G1/4 thread compatibility and clearance

Confirm that all mating components use G1/4 threads before ordering. The installed base height measures 20mm and total height reaches 43mm, so check available space around the port to ensure the elbow and tubing can sit without interference. The thread depth is 5mm; ensure the female port accepts this engagement length. Inspect the loop layout to confirm the 90-degree orientation matches the required tubing path.

Prednosti

  • Rotary design lets you aim any direction with 360-degree swivel
  • 90-degree elbow redirects tubing runs around tight corners
  • 20mm extension adds clearance for crowded component layouts
  • Brass construction with SX powder coat resists corrosion in blue finish
  • G1/4 threads install directly into standard water-cooling ports

Špecifikácie

TypeFittings

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Does my loop need G1/4 threads to use this fitting?

Yes, it connects to any component or block with standard G1/4 threads.

Will the 360-degree rotary let me align the 90° elbow around my existing GPU block?

The rotary base spins freely so you can orient the 20 mm offset in any direction before tightening.

How do I confirm the 20 mm extension is seated correctly after install?

Measure from the mounting face to the female port — it should sit 20 mm out with the total height reaching 43 mm.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.