暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Blue brass 90 degree rotary elbow fitting with 20mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow - True Blue

SKU CH-9A7N-BYYY4

A G1/4 rotary elbow that redirects tubing 90 degrees with a 20 mm extension and 360-degree adjustment

  • TypeFittings

Option True Blue

他に 9点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Rotary design lets you aim any direction with 360-degree swivel
  • 90-degree elbow redirects tubing runs around tight corners
  • 20mm extension adds clearance for crowded component layouts
  • Brass construction with SX powder coat resists corrosion in blue finish
  • G1/4 threads install directly into standard water-cooling ports

G1/4 90° rotary extension elbow

The PrimoChill G1/4 90° rotary extension elbow is a brass fitting designed for custom liquid-cooling loops. It provides a 90-degree turn with a 20mm extension and full 360-degree rotary adjustment for precise alignment. The SX powder-coated finish adds corrosion resistance and a consistent True Blue colour. It connects standard G1/4 threaded components in tight spaces.

Builders needing directional flexibility

This fitting suits builders who must route tubing around obstacles or align ports at unconventional angles within a custom loop. The rotary base allows the elbow to be oriented after installation without stressing connected components. It is not intended for users seeking a simple straight coupler or a fixed-angle elbow without extension height. Buyers who need a different thread standard should look elsewhere.

Verify G1/4 thread compatibility and clearance

Confirm that all mating components use G1/4 threads before ordering. The installed base height measures 20mm and total height reaches 43mm, so check available space around the port to ensure the elbow and tubing can sit without interference. The thread depth is 5mm; ensure the female port accepts this engagement length. Inspect the loop layout to confirm the 90-degree orientation matches the required tubing path.

特長

  • Rotary design lets you aim any direction with 360-degree swivel
  • 90-degree elbow redirects tubing runs around tight corners
  • 20mm extension adds clearance for crowded component layouts
  • Brass construction with SX powder coat resists corrosion in blue finish
  • G1/4 threads install directly into standard water-cooling ports

仕様

TypeFittings

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does my loop need G1/4 threads to use this fitting?

Yes, it connects to any component or block with standard G1/4 threads.

Will the 360-degree rotary let me align the 90° elbow around my existing GPU block?

The rotary base spins freely so you can orient the 20 mm offset in any direction before tightening.

How do I confirm the 20 mm extension is seated correctly after install?

Measure from the mounting face to the female port — it should sit 20 mm out with the total height reaching 43 mm.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。