Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Blue brass 90 degree rotary elbow fitting with 20mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow - True Blue

SKU CH-9A7N-BYYY4

A G1/4 rotary elbow that redirects tubing 90 degrees with a 20 mm extension and 360-degree adjustment

  • TypeFittings

Option True Blue

Prikaži još 9 konfiguracija

Precrtane verzije postoje, ali nisu dostupne ovdje.

  • Rotary design lets you aim any direction with 360-degree swivel
  • 90-degree elbow redirects tubing runs around tight corners
  • 20mm extension adds clearance for crowded component layouts
  • Brass construction with SX powder coat resists corrosion in blue finish
  • G1/4 threads install directly into standard water-cooling ports

G1/4 90° rotary extension elbow

The PrimoChill G1/4 90° rotary extension elbow is a brass fitting designed for custom liquid-cooling loops. It provides a 90-degree turn with a 20mm extension and full 360-degree rotary adjustment for precise alignment. The SX powder-coated finish adds corrosion resistance and a consistent True Blue colour. It connects standard G1/4 threaded components in tight spaces.

Builders needing directional flexibility

This fitting suits builders who must route tubing around obstacles or align ports at unconventional angles within a custom loop. The rotary base allows the elbow to be oriented after installation without stressing connected components. It is not intended for users seeking a simple straight coupler or a fixed-angle elbow without extension height. Buyers who need a different thread standard should look elsewhere.

Verify G1/4 thread compatibility and clearance

Confirm that all mating components use G1/4 threads before ordering. The installed base height measures 20mm and total height reaches 43mm, so check available space around the port to ensure the elbow and tubing can sit without interference. The thread depth is 5mm; ensure the female port accepts this engagement length. Inspect the loop layout to confirm the 90-degree orientation matches the required tubing path.

Istaknuto

  • Rotary design lets you aim any direction with 360-degree swivel
  • 90-degree elbow redirects tubing runs around tight corners
  • 20mm extension adds clearance for crowded component layouts
  • Brass construction with SX powder coat resists corrosion in blue finish
  • G1/4 threads install directly into standard water-cooling ports

Specifikacije

TypeFittings

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Does my loop need G1/4 threads to use this fitting?

Yes, it connects to any component or block with standard G1/4 threads.

Will the 360-degree rotary let me align the 90° elbow around my existing GPU block?

The rotary base spins freely so you can orient the 20 mm offset in any direction before tightening.

How do I confirm the 20 mm extension is seated correctly after install?

Measure from the mounting face to the female port — it should sit 20 mm out with the total height reaching 43 mm.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.