Solidigm D7-PS1030 6.4TB U.2 15mm PCIe 5.0 x4 enterprise SSD SB5PH27E064TOP1
- U.2 15mm
- 6.4TB
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Solidigm
12.8TB U.2 15mm PCIe 5.0 enterprise SSD delivering 14500 MBps read, 9300 MBps write and 3 DWPD endurance with FIPS security
Option 12.8TB U.2 FIPS
The Solidigm D7-PS1030 is a 12.8TB enterprise solid-state drive built for data-centre servers and high-density storage arrays. It uses 176L TLC 3D NAND and a PCIe 5.0 x4 interface to deliver sustained performance in write-intensive workloads. The drive carries FIPS security validation and a 3 DWPD endurance rating. It targets IT teams that need large capacity with consistent low latency.
The single specification that decides fit is the PCIe 5.0 x4 U.2 15mm connector. The host system must provide a compatible U.2 backplane or riser with PCIe 5.0 signalling and 15mm drive bays. Without that physical and electrical match the drive cannot be installed or will fall back to lower speeds. Verify the platform slot specification before purchase.
At 12.8TB the drive comfortably holds large databases, virtualisation images and analytics datasets while sustaining up to 14500 MBps sequential read and 9300 MBps sequential write. Random performance reaches 2750000 read IOPS and 800000 write IOPS at 4K blocks. The 70 PBW write budget supports the rated 3 DWPD across the warranty period; workloads exceeding that write volume will consume endurance faster than planned.
| Brand | Solidigm |
|---|---|
| Model | D7-PS1030 |
| Part Number | SB5PH27E128TOF1 |
| Form Factor | U.2 15mm |
| Capacity | 12.8TB |
| Memory Components | 176L TLC 3D NAND |
| Interface | PCI-Express 5.0 |
| Max Sequential Read | Up to 14500 MBps |
| Max Sequential Write | Up to 9300 MBps |
| 4KB Random Read | 2750000 IOPS (4K Blocks) |
| 4KB Random Write | 800000 IOPS (4K Blocks) |
| Endurance | 3 DWPD / 70 PBW |
| MTBF | 2,500,000 hours |
| Security | FIPS |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 23W |
| Operating Temperature | 0°C to 77°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 165g +/- 10g |
| Siuntos svoris | 0.17 kg |
| Pakuotės dydis | 140 × 110 × 17 mm |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
It enables rapid loading of large datasets and fast boot times for virtualised workloads, limited by the PCIe 5.0 x4 link and the host controller.
The x4 lane width sets a theoretical ceiling near 14500 MBps read and 9300 MBps write; actual speeds depend on CPU lane allocation and thermal headroom.
It needs a 2.5-inch U.2 hot-swap bay with 15mm vertical clearance and a compatible backplane connector for power and data.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?