Solidigm D7-PS1030 6.4TB U.2 15mm PCIe 5.0 x4 enterprise SSD SB5PH27E064TOP1
- U.2 15mm
- 6.4TB
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Solidigm
12.8TB U.2 15mm PCIe 5.0 enterprise SSD delivering 14500 MBps read, 9300 MBps write and 3 DWPD endurance with FIPS security
Option 12.8TB U.2 FIPS
The Solidigm D7-PS1030 is a 12.8TB enterprise solid-state drive built for data-centre servers and high-density storage arrays. It uses 176L TLC 3D NAND and a PCIe 5.0 x4 interface to deliver sustained performance in write-intensive workloads. The drive carries FIPS security validation and a 3 DWPD endurance rating. It targets IT teams that need large capacity with consistent low latency.
The single specification that decides fit is the PCIe 5.0 x4 U.2 15mm connector. The host system must provide a compatible U.2 backplane or riser with PCIe 5.0 signalling and 15mm drive bays. Without that physical and electrical match the drive cannot be installed or will fall back to lower speeds. Verify the platform slot specification before purchase.
At 12.8TB the drive comfortably holds large databases, virtualisation images and analytics datasets while sustaining up to 14500 MBps sequential read and 9300 MBps sequential write. Random performance reaches 2750000 read IOPS and 800000 write IOPS at 4K blocks. The 70 PBW write budget supports the rated 3 DWPD across the warranty period; workloads exceeding that write volume will consume endurance faster than planned.
| Brand | Solidigm |
|---|---|
| Model | D7-PS1030 |
| Part Number | SB5PH27E128TOF1 |
| Form Factor | U.2 15mm |
| Capacity | 12.8TB |
| Memory Components | 176L TLC 3D NAND |
| Interface | PCI-Express 5.0 |
| Max Sequential Read | Up to 14500 MBps |
| Max Sequential Write | Up to 9300 MBps |
| 4KB Random Read | 2750000 IOPS (4K Blocks) |
| 4KB Random Write | 800000 IOPS (4K Blocks) |
| Endurance | 3 DWPD / 70 PBW |
| MTBF | 2,500,000 hours |
| Security | FIPS |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 23W |
| Operating Temperature | 0°C to 77°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 165g +/- 10g |
| Sendingarþyngd | 0.17 kg |
| Stærð sendingar | 140 × 110 × 17 mm |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
It enables rapid loading of large datasets and fast boot times for virtualised workloads, limited by the PCIe 5.0 x4 link and the host controller.
The x4 lane width sets a theoretical ceiling near 14500 MBps read and 9300 MBps write; actual speeds depend on CPU lane allocation and thermal headroom.
It needs a 2.5-inch U.2 hot-swap bay with 15mm vertical clearance and a compatible backplane connector for power and data.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?