Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two gray aluminum heat spreader DIMMs side by side

Team Group

Team Group T-FORCE VULCAN Z 32GB (2 x 16GB) DDR4 3200 CL16 desktop RAM TLZGD432G3200HC16FDC01

SKU CH-3HR8-1812D MPN TLZGD432G3200HC16FDC01

32 GB dual-channel DDR4 kit running at 3200 MT/s with CL16 timings and a 1.35 V aluminum heat spreader

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL16
  • Timing16-20-20-40
  • Voltage1.35V

Capacity 32GB (2 x 16GB)

Speed DDR4 3200 (PC4 25600)

Option 16-20-20-40

  • 32 GB capacity handles heavy multitasking with two 16 GB modules
  • DDR4 3200 speed and CL16 latency deliver responsive system performance
  • 35 V operating voltage reduces power draw while maintaining stability
  • Aluminium heat spreader with thermal adhesive improves heat dissipation for sustained loads
  • Intel XMP 2.0 support enables one-click overclocking on compatible motherboards

32GB DDR4 3200 dual-channel kit

Team Group T-FORCE VULCAN Z supplies 32GB of desktop memory in a matched pair of 16GB modules. The kit runs at DDR4 3200 with CL16 latency and 1.35V voltage. An aluminium heat spreader uses high-conductivity adhesive to move heat away from the ICs. Intel XMP 2.0 is supported for automatic configuration.

Builders upgrading from slower DDR4

The 3200 CL16 rating suits mainstream Intel and AMD platforms that officially support this speed. Systems limited to lower memory frequencies will downclock the modules. Workstations requiring ECC or registered DIMMs should choose a different product line.

DDR4 3200 CL16 1.35V specification

The decisive figure is the DDR4 3200 CL16 1.35V rating; it determines whether the motherboard and CPU can run the kit at its advertised timing without manual tuning. Verify the platform’s qualified-vendor list before purchase.

Privalumai

  • 32 GB capacity handles heavy multitasking with two 16 GB modules
  • DDR4 3200 speed and CL16 latency deliver responsive system performance
  • 35 V operating voltage reduces power draw while maintaining stability
  • Aluminium heat spreader with thermal adhesive improves heat dissipation for sustained loads
  • Intel XMP 2.0 support enables one-click overclocking on compatible motherboards

Specifikacijos

BrandTeam
SeriesT-FORCE VULCAN Z
ModelTLZGD432G3200HC16FDC01
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL16
Timing16-20-20-40
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
BIOS/Performance ProfileIntel XMP 2.0
ColorGray
Heat SpreaderAluminum
FeaturesSimple design to perfectly protect the cooling module
High thermal conductive adhesive
Supports Intel & AMD motherboards
Selected high-quality IC
Supports XMP2.0
Energy saving with ultra-low working voltage
Siuntos svoris0.14 kg
Pakuotės dydis152 × 102 × 10 mm

Kiti šio modelio variantai

Dar 4 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will this kit run at its rated 3200 speed on a motherboard that only supports JEDEC speeds?

The modules default to standard DDR4 JEDEC speeds; enabling the XMP 2.0 profile in the BIOS is required to reach the rated 3200 MT/s with timings of 16-20-20-40 at 1.35 V.

Is the 1.35 V operating voltage safe for a board rated for 1.2 V standard DDR4?

The XMP 2.0 profile raises the voltage to 1.35 V, which is within the DDR4 specification; most modern Intel and AMD platforms accept this voltage when the XMP profile is activated.

What physical clearance does the aluminum heat spreader need around the CPU cooler?

The heat spreader is built from a single 0.8 mm thick aluminum piece; check your CPU cooler specifications for memory-slot clearance to ensure the modules fit without interference.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.