Team Group TLZGD416G3200HC16FDC01 16GB (2 x 8GB) DDR4 3200 desktop RAM
- 16GB (2 x 8GB)
- DDR4 3200 (PC4 2560…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Team Group
32 GB dual-channel DDR4 kit running at 3200 MT/s with CL16 timings and a 1.35 V aluminum heat spreader
Capacity 32GB (2 x 16GB)
Speed DDR4 3200 (PC4 25600)
Option 16-20-20-40
Team Group T-FORCE VULCAN Z supplies 32GB of desktop memory in a matched pair of 16GB modules. The kit runs at DDR4 3200 with CL16 latency and 1.35V voltage. An aluminium heat spreader uses high-conductivity adhesive to move heat away from the ICs. Intel XMP 2.0 is supported for automatic configuration.
The 3200 CL16 rating suits mainstream Intel and AMD platforms that officially support this speed. Systems limited to lower memory frequencies will downclock the modules. Workstations requiring ECC or registered DIMMs should choose a different product line.
The decisive figure is the DDR4 3200 CL16 1.35V rating; it determines whether the motherboard and CPU can run the kit at its advertised timing without manual tuning. Verify the platform’s qualified-vendor list before purchase.
| Brand | Team |
|---|---|
| Series | T-FORCE VULCAN Z |
| Model | TLZGD432G3200HC16FDC01 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL16 |
| Timing | 16-20-20-40 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Gray |
| Heat Spreader | Aluminum |
| Features | Simple design to perfectly protect the cooling module High thermal conductive adhesive Supports Intel & AMD motherboards Selected high-quality IC Supports XMP2.0 Energy saving with ultra-low working voltage |
| Prepravná hmotnosť | 0.14 kg |
| Rozmery balenia | 152 × 102 × 10 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The modules default to standard DDR4 JEDEC speeds; enabling the XMP 2.0 profile in the BIOS is required to reach the rated 3200 MT/s with timings of 16-20-20-40 at 1.35 V.
The XMP 2.0 profile raises the voltage to 1.35 V, which is within the DDR4 specification; most modern Intel and AMD platforms accept this voltage when the XMP profile is activated.
The heat spreader is built from a single 0.8 mm thick aluminum piece; check your CPU cooler specifications for memory-slot clearance to ensure the modules fit without interference.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?