SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Western Digital
A 400GB 7200 RPM SATA desktop drive with 16MB cache and 8.9ms seek time
The Western Digital RE2 WD4001ABYS is a 400GB 3.5-inch internal hard drive built for desktop systems. It connects via a SATA 3.0Gb/s interface and spins at 7200 RPM with a 16MB cache. This bare drive suits users adding primary or secondary storage to a compatible motherboard.
Under continuous workloads the spindle holds a steady 7200 RPM while the 16MB buffer absorbs write bursts. Average seek and write times of 8.9ms keep latency predictable during long file transfers or backup jobs. The SATA 3.0Gb/s link provides consistent throughput without the thermal throttling seen on smaller high-speed drives.
The 400GB capacity replaces smaller 3.5-inch SATA drives when more space is needed for applications and archives. The jump is worthwhile when the existing drive is full or its cache is below 16MB. Buyers who need higher areal density or a newer interface should look elsewhere.
| Brand | Western Digital |
|---|---|
| Series | RE2 |
| Model | WD4001ABYS |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 400GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 8.9ms |
| Average Write Time | 8.9ms |
| Form Factor | 3.5" |
| Siuntos svoris | 0.68 kg |
| Pakuotės dydis | 203 × 152 × 51 mm |
The WD4001ABYS spins at 7200 RPM with a SATA 3.0Gb/s interface; sustained operation will generate typical 3.5-inch mechanical-drive heat and draw standard SATA power levels.
You need a free SATA data port on the motherboard or controller, a SATA data cable, and a SATA power connector from the power supply.
Yes, the SATA 3.0Gb/s interface is backward compatible, so it will operate at the slower 1.5Gb/s speed when paired with an older drive on the same controller.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?