SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Western Digital
A 400GB 7200 RPM SATA desktop drive with 16MB cache and 8.9ms seek time
The Western Digital RE2 WD4001ABYS is a 400GB 3.5-inch internal hard drive built for desktop systems. It connects via a SATA 3.0Gb/s interface and spins at 7200 RPM with a 16MB cache. This bare drive suits users adding primary or secondary storage to a compatible motherboard.
Under continuous workloads the spindle holds a steady 7200 RPM while the 16MB buffer absorbs write bursts. Average seek and write times of 8.9ms keep latency predictable during long file transfers or backup jobs. The SATA 3.0Gb/s link provides consistent throughput without the thermal throttling seen on smaller high-speed drives.
The 400GB capacity replaces smaller 3.5-inch SATA drives when more space is needed for applications and archives. The jump is worthwhile when the existing drive is full or its cache is below 16MB. Buyers who need higher areal density or a newer interface should look elsewhere.
| Brand | Western Digital |
|---|---|
| Series | RE2 |
| Model | WD4001ABYS |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 400GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 8.9ms |
| Average Write Time | 8.9ms |
| Form Factor | 3.5" |
| Тегло на пратката | 0.68 kg |
| Размери на опаковката | 203 × 152 × 51 mm |
The WD4001ABYS spins at 7200 RPM with a SATA 3.0Gb/s interface; sustained operation will generate typical 3.5-inch mechanical-drive heat and draw standard SATA power levels.
You need a free SATA data port on the motherboard or controller, a SATA data cable, and a SATA power connector from the power supply.
Yes, the SATA 3.0Gb/s interface is backward compatible, so it will operate at the slower 1.5Gb/s speed when paired with an older drive on the same controller.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?