SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Western Digital
A 400GB 7200 RPM SATA desktop drive with 16MB cache and 8.9ms seek time
The Western Digital RE2 WD4001ABYS is a 400GB 3.5-inch internal hard drive built for desktop systems. It connects via a SATA 3.0Gb/s interface and spins at 7200 RPM with a 16MB cache. This bare drive suits users adding primary or secondary storage to a compatible motherboard.
Under continuous workloads the spindle holds a steady 7200 RPM while the 16MB buffer absorbs write bursts. Average seek and write times of 8.9ms keep latency predictable during long file transfers or backup jobs. The SATA 3.0Gb/s link provides consistent throughput without the thermal throttling seen on smaller high-speed drives.
The 400GB capacity replaces smaller 3.5-inch SATA drives when more space is needed for applications and archives. The jump is worthwhile when the existing drive is full or its cache is below 16MB. Buyers who need higher areal density or a newer interface should look elsewhere.
| Brand | Western Digital |
|---|---|
| Series | RE2 |
| Model | WD4001ABYS |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 400GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 8.9ms |
| Average Write Time | 8.9ms |
| Form Factor | 3.5" |
| Sūtījuma svars | 0.68 kg |
| Sūtījuma izmēri | 203 × 152 × 51 mm |
The WD4001ABYS spins at 7200 RPM with a SATA 3.0Gb/s interface; sustained operation will generate typical 3.5-inch mechanical-drive heat and draw standard SATA power levels.
You need a free SATA data port on the motherboard or controller, a SATA data cable, and a SATA power connector from the power supply.
Yes, the SATA 3.0Gb/s interface is backward compatible, so it will operate at the slower 1.5Gb/s speed when paired with an older drive on the same controller.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?