SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Western Digital
A 400GB 7200 RPM SATA desktop drive with 16MB cache and 8.9ms seek time
The Western Digital RE2 WD4001ABYS is a 400GB 3.5-inch internal hard drive built for desktop systems. It connects via a SATA 3.0Gb/s interface and spins at 7200 RPM with a 16MB cache. This bare drive suits users adding primary or secondary storage to a compatible motherboard.
Under continuous workloads the spindle holds a steady 7200 RPM while the 16MB buffer absorbs write bursts. Average seek and write times of 8.9ms keep latency predictable during long file transfers or backup jobs. The SATA 3.0Gb/s link provides consistent throughput without the thermal throttling seen on smaller high-speed drives.
The 400GB capacity replaces smaller 3.5-inch SATA drives when more space is needed for applications and archives. The jump is worthwhile when the existing drive is full or its cache is below 16MB. Buyers who need higher areal density or a newer interface should look elsewhere.
| Brand | Western Digital |
|---|---|
| Series | RE2 |
| Model | WD4001ABYS |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 400GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 8.9ms |
| Average Write Time | 8.9ms |
| Form Factor | 3.5" |
| Prepravná hmotnosť | 0.68 kg |
| Rozmery balenia | 203 × 152 × 51 mm |
The WD4001ABYS spins at 7200 RPM with a SATA 3.0Gb/s interface; sustained operation will generate typical 3.5-inch mechanical-drive heat and draw standard SATA power levels.
You need a free SATA data port on the motherboard or controller, a SATA data cable, and a SATA power connector from the power supply.
Yes, the SATA 3.0Gb/s interface is backward compatible, so it will operate at the slower 1.5Gb/s speed when paired with an older drive on the same controller.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?