SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Western Digital
A 400GB 7200 RPM SATA desktop drive with 16MB cache and 8.9ms seek time
The Western Digital RE2 WD4001ABYS is a 400GB 3.5-inch internal hard drive built for desktop systems. It connects via a SATA 3.0Gb/s interface and spins at 7200 RPM with a 16MB cache. This bare drive suits users adding primary or secondary storage to a compatible motherboard.
Under continuous workloads the spindle holds a steady 7200 RPM while the 16MB buffer absorbs write bursts. Average seek and write times of 8.9ms keep latency predictable during long file transfers or backup jobs. The SATA 3.0Gb/s link provides consistent throughput without the thermal throttling seen on smaller high-speed drives.
The 400GB capacity replaces smaller 3.5-inch SATA drives when more space is needed for applications and archives. The jump is worthwhile when the existing drive is full or its cache is below 16MB. Buyers who need higher areal density or a newer interface should look elsewhere.
| Brand | Western Digital |
|---|---|
| Series | RE2 |
| Model | WD4001ABYS |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 400GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 8.9ms |
| Average Write Time | 8.9ms |
| Form Factor | 3.5" |
| Peso de envío | 0.68 kg |
| Dimensiones del paquete | 203 × 152 × 51 mm |
The WD4001ABYS spins at 7200 RPM with a SATA 3.0Gb/s interface; sustained operation will generate typical 3.5-inch mechanical-drive heat and draw standard SATA power levels.
You need a free SATA data port on the motherboard or controller, a SATA data cable, and a SATA power connector from the power supply.
Yes, the SATA 3.0Gb/s interface is backward compatible, so it will operate at the slower 1.5Gb/s speed when paired with an older drive on the same controller.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?