NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
4GB DDR3 1066MHz ECC registered server memory with 4Rx8 organisation and 1.5V operation
This 4 GB DDR3 registered DIMM is built for servers and workstations that require ECC error correction. It replaces Hynix modules HMT151R7AFP8C-G7, HMT151R7BFR8C-G7 and HMT151R7TFR8C-G7 in compatible systems. The module runs at 1066 MHz with a CL7 latency and standard 1.5 V operation.
The single specification that decides fit is the registered ECC RDIMM 4Rx8 organisation. Your motherboard must support registered error-correcting memory with this rank configuration; unbuffered or non-ECC DIMMs will not work in its place. Verify the platform documentation before ordering.
Installation follows the standard 240-pin DDR3 DIMM procedure: align the notch, press firmly until the retention clips lock. The usual issue is mixing registered and unbuffered modules or exceeding the server's maximum rank count per channel, which prevents the system from posting.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 1066 MHz DDR3, delivering a PC3-8500 data rate of 8500 MB/s when the platform supports that frequency.
The 240-pin registered DIMM presents a buffered signal to the memory controller, so the motherboard must support registered ECC DDR3 to operate correctly.
It fits a standard 240-pin DDR3 DIMM socket; the 4Rx8 organisation uses the full module height, so verify that the server chassis allows full-height DIMMs.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?