Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 240-pin DDR3 DIMM with silver heat spreader and black chips

A-Tech

A-Tech 4GB DDR3 1066MHz PC3-8500 ECC RDIMM 4Rx8 Server RAM

SKU CH-HZCM-MWAH7

4GB DDR3 1066MHz ECC registered server memory with 4Rx8 organisation and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Boosts server responsiveness with 4GB DDR3 1066MHz capacity
  • Ensures data integrity through ECC registered DIMM design
  • Delivers stable operation at standard 1.50V DDR3 voltage
  • Verified compatible replacement for Hynix 151 series modules
  • Rigorously tested for dependable server and workstation performance

Server Memory Upgrade

This 4 GB DDR3 registered DIMM is built for servers and workstations that require ECC error correction. It replaces Hynix modules HMT151R7AFP8C-G7, HMT151R7BFR8C-G7 and HMT151R7TFR8C-G7 in compatible systems. The module runs at 1066 MHz with a CL7 latency and standard 1.5 V operation.

Registered ECC Requirement

The single specification that decides fit is the registered ECC RDIMM 4Rx8 organisation. Your motherboard must support registered error-correcting memory with this rank configuration; unbuffered or non-ECC DIMMs will not work in its place. Verify the platform documentation before ordering.

240-Pin DIMM Installation

Installation follows the standard 240-pin DDR3 DIMM procedure: align the notch, press firmly until the retention clips lock. The usual issue is mixing registered and unbuffered modules or exceeding the server's maximum rank count per channel, which prevents the system from posting.

Helstu kostir

  • Boosts server responsiveness with 4GB DDR3 1066MHz capacity
  • Ensures data integrity through ECC registered DIMM design
  • Delivers stable operation at standard 1.50V DDR3 voltage
  • Verified compatible replacement for Hynix 151 series modules
  • Rigorously tested for dependable server and workstation performance

Tæknilýsing

BrandA-Tech
Capacity4GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spurningar um þessa vöru

What does the 1066 MHz speed mean once the module is installed in a server?

The module runs at 1066 MHz DDR3, delivering a PC3-8500 data rate of 8500 MB/s when the platform supports that frequency.

How does the registered DDR3 interface affect what the system can use?

The 240-pin registered DIMM presents a buffered signal to the memory controller, so the motherboard must support registered ECC DDR3 to operate correctly.

What physical slot and clearance does this 4Rx8 module require?

It fits a standard 240-pin DDR3 DIMM socket; the 4Rx8 organisation uses the full module height, so verify that the server chassis allows full-height DIMMs.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.