Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular metal ASIC miner with integrated PSU, matte grey finish, front intake fans, rear exhaust grille

bitmain

bitmain Antminer S19 95TH/s 3250W PSU mining hardware

SKU CH-Q08Q-QG39F

ASIC miner delivering 95 TH/s at 3250 W with included PSU, requires 220 V input

  • 95 TH/s hash rate for Bitcoin mining
  • 3250 W power draw for energy planning
  • 220 V input requirement for safe operation
  • Includes PSU for simplified setup
  • Brand-new ASIC miner ready to deploy

Bitcoin ASIC Miner 95 TH/s

The Bitmain Antminer S19 is a dedicated Bitcoin mining machine rated at 95 TH/s and includes a 3250 W power supply. It requires a 220 V input and is intended for operators who can provide that voltage and the associated power draw.

High power mining operators

This unit suits miners who have access to 220 V infrastructure and can sustain a 3250 W continuous load. Buyers without a 220 V supply or who cannot accommodate the power consumption should look at other options.

220 V input requirement

The miner demands a 220 V electrical supply; connecting it to a different voltage will likely damage the hardware. Verify that your site can deliver this voltage before purchase.

Priekšrocības

  • 95 TH/s hash rate for Bitcoin mining
  • 3250 W power draw for energy planning
  • 220 V input requirement for safe operation
  • Includes PSU for simplified setup
  • Brand-new ASIC miner ready to deploy

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

What input voltage must my facility provide for the Antminer S19 95TH/s to operate?

The miner requires a 220V supply; using the wrong voltage will probably damage the unit.

Can the included PSU run alongside my existing 110TH/s Antminer S19 Pro on the same circuit?

Each S19 draws 3250W, so the combined load would exceed typical branch-circuit limits and needs dedicated wiring.

How do I confirm the S19 95TH/s is hashing at its rated speed after power-up?

Check the miner’s status dashboard; it should report a hash rate close to 95TH/s once the boards initialise.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.