Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular metal ASIC miner with integrated PSU, matte grey finish, front intake fans, rear exhaust grille

bitmain

bitmain Antminer S19 95TH/s 3250W PSU mining hardware

SKU CH-Q08Q-QG39F

ASIC miner delivering 95 TH/s at 3250 W with included PSU, requires 220 V input

  • 95 TH/s hash rate for Bitcoin mining
  • 3250 W power draw for energy planning
  • 220 V input requirement for safe operation
  • Includes PSU for simplified setup
  • Brand-new ASIC miner ready to deploy

Bitcoin ASIC Miner 95 TH/s

The Bitmain Antminer S19 is a dedicated Bitcoin mining machine rated at 95 TH/s and includes a 3250 W power supply. It requires a 220 V input and is intended for operators who can provide that voltage and the associated power draw.

High power mining operators

This unit suits miners who have access to 220 V infrastructure and can sustain a 3250 W continuous load. Buyers without a 220 V supply or who cannot accommodate the power consumption should look at other options.

220 V input requirement

The miner demands a 220 V electrical supply; connecting it to a different voltage will likely damage the hardware. Verify that your site can deliver this voltage before purchase.

Puncte forte

  • 95 TH/s hash rate for Bitcoin mining
  • 3250 W power draw for energy planning
  • 220 V input requirement for safe operation
  • Includes PSU for simplified setup
  • Brand-new ASIC miner ready to deploy

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

What input voltage must my facility provide for the Antminer S19 95TH/s to operate?

The miner requires a 220V supply; using the wrong voltage will probably damage the unit.

Can the included PSU run alongside my existing 110TH/s Antminer S19 Pro on the same circuit?

Each S19 draws 3250W, so the combined load would exceed typical branch-circuit limits and needs dedicated wiring.

How do I confirm the S19 95TH/s is hashing at its rated speed after power-up?

Check the miner’s status dashboard; it should report a hash rate close to 95TH/s once the boards initialise.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.