Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Rectangular metal ASIC miner with integrated PSU, matte grey finish, front intake fans, rear exhaust grille

bitmain

bitmain Antminer S19 95TH/s 3250W PSU mining hardware

SKU CH-Q08Q-QG39F

ASIC miner delivering 95 TH/s at 3250 W with included PSU, requires 220 V input

  • 95 TH/s hash rate for Bitcoin mining
  • 3250 W power draw for energy planning
  • 220 V input requirement for safe operation
  • Includes PSU for simplified setup
  • Brand-new ASIC miner ready to deploy

Bitcoin ASIC Miner 95 TH/s

The Bitmain Antminer S19 is a dedicated Bitcoin mining machine rated at 95 TH/s and includes a 3250 W power supply. It requires a 220 V input and is intended for operators who can provide that voltage and the associated power draw.

High power mining operators

This unit suits miners who have access to 220 V infrastructure and can sustain a 3250 W continuous load. Buyers without a 220 V supply or who cannot accommodate the power consumption should look at other options.

220 V input requirement

The miner demands a 220 V electrical supply; connecting it to a different voltage will likely damage the hardware. Verify that your site can deliver this voltage before purchase.

I korthet

  • 95 TH/s hash rate for Bitcoin mining
  • 3250 W power draw for energy planning
  • 220 V input requirement for safe operation
  • Includes PSU for simplified setup
  • Brand-new ASIC miner ready to deploy

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

What input voltage must my facility provide for the Antminer S19 95TH/s to operate?

The miner requires a 220V supply; using the wrong voltage will probably damage the unit.

Can the included PSU run alongside my existing 110TH/s Antminer S19 Pro on the same circuit?

Each S19 draws 3250W, so the combined load would exceed typical branch-circuit limits and needs dedicated wiring.

How do I confirm the S19 95TH/s is hashing at its rated speed after power-up?

Check the miner’s status dashboard; it should report a hash rate close to 95TH/s once the boards initialise.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.