Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular metal ASIC miner with integrated PSU, matte grey finish, front intake fans, rear exhaust grille

bitmain

bitmain Antminer S19 95TH/s 3250W PSU mining hardware

SKU CH-Q08Q-QG39F

ASIC miner delivering 95 TH/s at 3250 W with included PSU, requires 220 V input

  • 95 TH/s hash rate for Bitcoin mining
  • 3250 W power draw for energy planning
  • 220 V input requirement for safe operation
  • Includes PSU for simplified setup
  • Brand-new ASIC miner ready to deploy

Bitcoin ASIC Miner 95 TH/s

The Bitmain Antminer S19 is a dedicated Bitcoin mining machine rated at 95 TH/s and includes a 3250 W power supply. It requires a 220 V input and is intended for operators who can provide that voltage and the associated power draw.

High power mining operators

This unit suits miners who have access to 220 V infrastructure and can sustain a 3250 W continuous load. Buyers without a 220 V supply or who cannot accommodate the power consumption should look at other options.

220 V input requirement

The miner demands a 220 V electrical supply; connecting it to a different voltage will likely damage the hardware. Verify that your site can deliver this voltage before purchase.

Poudarki

  • 95 TH/s hash rate for Bitcoin mining
  • 3250 W power draw for energy planning
  • 220 V input requirement for safe operation
  • Includes PSU for simplified setup
  • Brand-new ASIC miner ready to deploy

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

What input voltage must my facility provide for the Antminer S19 95TH/s to operate?

The miner requires a 220V supply; using the wrong voltage will probably damage the unit.

Can the included PSU run alongside my existing 110TH/s Antminer S19 Pro on the same circuit?

Each S19 draws 3250W, so the combined load would exceed typical branch-circuit limits and needs dedicated wiring.

How do I confirm the S19 95TH/s is hashing at its rated speed after power-up?

Check the miner’s status dashboard; it should report a hash rate close to 95TH/s once the boards initialise.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.