Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular metal ASIC miner with integrated PSU, matte grey finish, front intake fans, rear exhaust grille

bitmain

bitmain Antminer S19 95TH/s 3250W PSU mining hardware

SKU CH-Q08Q-QG39F

ASIC miner delivering 95 TH/s at 3250 W with included PSU, requires 220 V input

  • 95 TH/s hash rate for Bitcoin mining
  • 3250 W power draw for energy planning
  • 220 V input requirement for safe operation
  • Includes PSU for simplified setup
  • Brand-new ASIC miner ready to deploy

Bitcoin ASIC Miner 95 TH/s

The Bitmain Antminer S19 is a dedicated Bitcoin mining machine rated at 95 TH/s and includes a 3250 W power supply. It requires a 220 V input and is intended for operators who can provide that voltage and the associated power draw.

High power mining operators

This unit suits miners who have access to 220 V infrastructure and can sustain a 3250 W continuous load. Buyers without a 220 V supply or who cannot accommodate the power consumption should look at other options.

220 V input requirement

The miner demands a 220 V electrical supply; connecting it to a different voltage will likely damage the hardware. Verify that your site can deliver this voltage before purchase.

Helstu kostir

  • 95 TH/s hash rate for Bitcoin mining
  • 3250 W power draw for energy planning
  • 220 V input requirement for safe operation
  • Includes PSU for simplified setup
  • Brand-new ASIC miner ready to deploy

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

What input voltage must my facility provide for the Antminer S19 95TH/s to operate?

The miner requires a 220V supply; using the wrong voltage will probably damage the unit.

Can the included PSU run alongside my existing 110TH/s Antminer S19 Pro on the same circuit?

Each S19 draws 3250W, so the combined load would exceed typical branch-circuit limits and needs dedicated wiring.

How do I confirm the S19 95TH/s is hashing at its rated speed after power-up?

Check the miner’s status dashboard; it should report a hash rate close to 95TH/s once the boards initialise.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.