NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Brute Networks
Dell-compatible 16GB DDR4-2133 registered ECC RDIMM upgrades server memory capacity with CL15 timing and 1.2V operation
This 16GB DDR4-2133 registered DIMM is built for Dell servers that require ECC memory with a 2Rx4 organisation. It operates at 1.20V with a CAS latency of 15 and fits standard 288-pin DDR4 slots. The module uses major-brand DRAM chips and is validated as 100% compatible with Dell part number RDWTP.
Registered buffering reduces electrical load on the memory controller, allowing the module to sustain its rated DDR4-2133 speed under continuous multi-threaded demand. ECC detection corrects single-bit errors on the fly, preventing the silent data corruption that can accumulate during long-running database or virtualisation tasks. The 2Rx4 rank layout keeps signal integrity stable when all slots are populated.
Installation follows standard RDIMM procedure: power down, open the chassis, align the notch with the 288-pin key and press until the retention clips engage. The module will not function in platforms that require unbuffered UDIMMs or load-reduced LRDIMMs, so buyers must confirm their server specifies registered memory. Mixing ranks or speeds across channels can prevent the system from posting.
| Brand | Dell |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
The module operates at 1.20V, the standard voltage for DDR4, so power consumption stays within normal DDR4 limits for a 16GB registered DIMM under sustained load.
Yes, the system must accept 288-pin DDR4 registered RDIMMs with ECC; the stick is 2Rx4 CL15 at 2133 MT/s and requires a compatible chipset and BIOS.
All populated slots will run at the lowest common speed and latency; adding this 2133 MT/s CL15 module alongside slower DDR4 will down-clock the new stick to match.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?