Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green 288-pin DDR4 RDIMM module, 16GB capacity

Brute Networks

Brute Networks Dell Compatible 16GB DDR4-2133 2Rx4 Registered RDIMM

SKU CH-X3XM-7YFX2

Dell-compatible 16GB DDR4-2133 registered ECC RDIMM upgrades server memory capacity with CL15 timing and 1.2V operation

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 16 GB DDR4-2133 registered ECC memory boosts server capacity
  • CL15 latency at 1.20 V delivers responsive performance for virtualized workloads
  • 2Rx4 dual-rank organization maximizes bandwidth per DIMM slot
  • 100 % Dell compatible RDWTP equivalent protects existing service contracts
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability

Dell-Compatible 16GB DDR4 RDIMM

This 16GB DDR4-2133 registered DIMM is built for Dell servers that require ECC memory with a 2Rx4 organisation. It operates at 1.20V with a CAS latency of 15 and fits standard 288-pin DDR4 slots. The module uses major-brand DRAM chips and is validated as 100% compatible with Dell part number RDWTP.

Steady throughput for virtualised workloads

Registered buffering reduces electrical load on the memory controller, allowing the module to sustain its rated DDR4-2133 speed under continuous multi-threaded demand. ECC detection corrects single-bit errors on the fly, preventing the silent data corruption that can accumulate during long-running database or virtualisation tasks. The 2Rx4 rank layout keeps signal integrity stable when all slots are populated.

Simple drop-in upgrade for qualified Dell systems

Installation follows standard RDIMM procedure: power down, open the chassis, align the notch with the 288-pin key and press until the retention clips engage. The module will not function in platforms that require unbuffered UDIMMs or load-reduced LRDIMMs, so buyers must confirm their server specifies registered memory. Mixing ranks or speeds across channels can prevent the system from posting.

Fordele

  • 16 GB DDR4-2133 registered ECC memory boosts server capacity
  • CL15 latency at 1.20 V delivers responsive performance for virtualized workloads
  • 2Rx4 dual-rank organization maximizes bandwidth per DIMM slot
  • 100 % Dell compatible RDWTP equivalent protects existing service contracts
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability

Specifikationer

BrandDell
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

Spørgsmål om denne vare

What power draw should I expect from this 1.20V DDR4-2133 RDIMM when the server runs continuously?

The module operates at 1.20V, the standard voltage for DDR4, so power consumption stays within normal DDR4 limits for a 16GB registered DIMM under sustained load.

Does my Dell server need to support registered ECC memory and 288-pin DDR4 slots to use this 16GB module?

Yes, the system must accept 288-pin DDR4 registered RDIMMs with ECC; the stick is 2Rx4 CL15 at 2133 MT/s and requires a compatible chipset and BIOS.

Can I mix this CL15 2133 MT/s registered DIMM with slower CL15 DDR4 modules already in the server?

All populated slots will run at the lowest common speed and latency; adding this 2133 MT/s CL15 module alongside slower DDR4 will down-clock the new stick to match.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.