Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 RDIMM module, 16GB capacity

Brute Networks

Brute Networks Dell Compatible 16GB DDR4-2133 2Rx4 Registered RDIMM

SKU CH-X3XM-7YFX2

Dell-compatible 16GB DDR4-2133 registered ECC RDIMM upgrades server memory capacity with CL15 timing and 1.2V operation

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 16 GB DDR4-2133 registered ECC memory boosts server capacity
  • CL15 latency at 1.20 V delivers responsive performance for virtualized workloads
  • 2Rx4 dual-rank organization maximizes bandwidth per DIMM slot
  • 100 % Dell compatible RDWTP equivalent protects existing service contracts
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability

Dell-Compatible 16GB DDR4 RDIMM

This 16GB DDR4-2133 registered DIMM is built for Dell servers that require ECC memory with a 2Rx4 organisation. It operates at 1.20V with a CAS latency of 15 and fits standard 288-pin DDR4 slots. The module uses major-brand DRAM chips and is validated as 100% compatible with Dell part number RDWTP.

Steady throughput for virtualised workloads

Registered buffering reduces electrical load on the memory controller, allowing the module to sustain its rated DDR4-2133 speed under continuous multi-threaded demand. ECC detection corrects single-bit errors on the fly, preventing the silent data corruption that can accumulate during long-running database or virtualisation tasks. The 2Rx4 rank layout keeps signal integrity stable when all slots are populated.

Simple drop-in upgrade for qualified Dell systems

Installation follows standard RDIMM procedure: power down, open the chassis, align the notch with the 288-pin key and press until the retention clips engage. The module will not function in platforms that require unbuffered UDIMMs or load-reduced LRDIMMs, so buyers must confirm their server specifies registered memory. Mixing ranks or speeds across channels can prevent the system from posting.

Kohokohdat

  • 16 GB DDR4-2133 registered ECC memory boosts server capacity
  • CL15 latency at 1.20 V delivers responsive performance for virtualized workloads
  • 2Rx4 dual-rank organization maximizes bandwidth per DIMM slot
  • 100 % Dell compatible RDWTP equivalent protects existing service contracts
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability

Tekniset tiedot

BrandDell
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

What power draw should I expect from this 1.20V DDR4-2133 RDIMM when the server runs continuously?

The module operates at 1.20V, the standard voltage for DDR4, so power consumption stays within normal DDR4 limits for a 16GB registered DIMM under sustained load.

Does my Dell server need to support registered ECC memory and 288-pin DDR4 slots to use this 16GB module?

Yes, the system must accept 288-pin DDR4 registered RDIMMs with ECC; the stick is 2Rx4 CL15 at 2133 MT/s and requires a compatible chipset and BIOS.

Can I mix this CL15 2133 MT/s registered DIMM with slower CL15 DDR4 modules already in the server?

All populated slots will run at the lowest common speed and latency; adding this 2133 MT/s CL15 module alongside slower DDR4 will down-clock the new stick to match.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.