HyperX FURY 16GB (2 x 8GB) DDR3 1866 CL10 HX318C10FK2/16
- 16GB (2 x 8GB)
- DDR3 1866 (PC3 1490…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
HyperX
8GB DDR3 desktop module running at 1866MHz with CL10 timing and a blue asymmetric heat spreader
Capacity 8GB
This HyperX FURY module is an 8GB DDR3 desktop memory kit rated for 1866MHz speed. It operates at a standard 1.50V voltage with CL10 latency timings of 10-11-10. The blue asymmetric heat spreader aids thermal dissipation for stable operation.
This unbuffered, non-ECC DIMM fits standard desktop motherboards with DDR3 slots supporting 1866MHz speeds. It works with compatible Intel and AMD platforms using JEDEC standard voltages. Systems requiring ECC, registered memory, or a different DDR generation should select an alternative module.
The decisive specification is the DDR3 1866MHz speed combined with CL10 timing at 1.50V. Verify your motherboard supports this frequency and voltage before purchase. Automatic overclocking functionality simplifies installation for plug-and-play performance.
| Brand | HyperX |
|---|---|
| Series | FURY |
| Model | HX318C10F/8 |
| Capacity | 8GB |
| Speed | DDR3 1866 |
| CAS Latency | CL10 |
| Timing | 10-11-10 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Color | Blue |
| Heat Spreader | Yes |
| Features | JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply VDDQ = 1.5V (1.425V ~ 1.575V) 933 MHz fCK for 1866 MB/sec/pin 8 independent internal bank Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 Programmable Additive Latency: 0, CL - 2, or CL - 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm +/- 1%) On Di |
| Sūtījuma svars | 0.05 kg |
| Sūtījuma izmēri | 151 × 56 × 14 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes, it is an unbuffered DIMM built to the JEDEC 1.5 V standard, so it installs in any desktop DDR3 slot that accepts 1866 MHz memory.
They show CAS latency of 10 cycles with 11-cycle RAS-to-CAS and RAS precharge delays, giving low access latency at the rated 1866 MHz data rate.
The module supports JEDEC 1.5 V operation (1.425 V–1.575 V range); 1.35 V is not a validated voltage for this part.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?