HyperX FURY 16GB (2 x 8GB) DDR3 1866 CL10 HX318C10FK2/16
- 16GB (2 x 8GB)
- DDR3 1866 (PC3 1490…
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
HyperX
8GB DDR3 desktop module running at 1866MHz with CL10 timing and a blue asymmetric heat spreader
Capacity 8GB
This HyperX FURY module is an 8GB DDR3 desktop memory kit rated for 1866MHz speed. It operates at a standard 1.50V voltage with CL10 latency timings of 10-11-10. The blue asymmetric heat spreader aids thermal dissipation for stable operation.
This unbuffered, non-ECC DIMM fits standard desktop motherboards with DDR3 slots supporting 1866MHz speeds. It works with compatible Intel and AMD platforms using JEDEC standard voltages. Systems requiring ECC, registered memory, or a different DDR generation should select an alternative module.
The decisive specification is the DDR3 1866MHz speed combined with CL10 timing at 1.50V. Verify your motherboard supports this frequency and voltage before purchase. Automatic overclocking functionality simplifies installation for plug-and-play performance.
| Brand | HyperX |
|---|---|
| Series | FURY |
| Model | HX318C10F/8 |
| Capacity | 8GB |
| Speed | DDR3 1866 |
| CAS Latency | CL10 |
| Timing | 10-11-10 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Color | Blue |
| Heat Spreader | Yes |
| Features | JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply VDDQ = 1.5V (1.425V ~ 1.575V) 933 MHz fCK for 1866 MB/sec/pin 8 independent internal bank Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 Programmable Additive Latency: 0, CL - 2, or CL - 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm +/- 1%) On Di |
| Peso de envío | 0.05 kg |
| Dimensiones del paquete | 151 × 56 × 14 mm |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Yes, it is an unbuffered DIMM built to the JEDEC 1.5 V standard, so it installs in any desktop DDR3 slot that accepts 1866 MHz memory.
They show CAS latency of 10 cycles with 11-cycle RAS-to-CAS and RAS precharge delays, giving low access latency at the rated 1866 MHz data rate.
The module supports JEDEC 1.5 V operation (1.425 V–1.575 V range); 1.35 V is not a validated voltage for this part.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?