HyperX FURY 16GB (2 x 8GB) DDR3 1866 CL10 HX318C10FK2/16
- 16GB (2 x 8GB)
- DDR3 1866 (PC3 1490…
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
HyperX
8GB DDR3 desktop module running at 1866MHz with CL10 timing and a blue asymmetric heat spreader
Capacity 8GB
This HyperX FURY module is an 8GB DDR3 desktop memory kit rated for 1866MHz speed. It operates at a standard 1.50V voltage with CL10 latency timings of 10-11-10. The blue asymmetric heat spreader aids thermal dissipation for stable operation.
This unbuffered, non-ECC DIMM fits standard desktop motherboards with DDR3 slots supporting 1866MHz speeds. It works with compatible Intel and AMD platforms using JEDEC standard voltages. Systems requiring ECC, registered memory, or a different DDR generation should select an alternative module.
The decisive specification is the DDR3 1866MHz speed combined with CL10 timing at 1.50V. Verify your motherboard supports this frequency and voltage before purchase. Automatic overclocking functionality simplifies installation for plug-and-play performance.
| Brand | HyperX |
|---|---|
| Series | FURY |
| Model | HX318C10F/8 |
| Capacity | 8GB |
| Speed | DDR3 1866 |
| CAS Latency | CL10 |
| Timing | 10-11-10 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Color | Blue |
| Heat Spreader | Yes |
| Features | JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply VDDQ = 1.5V (1.425V ~ 1.575V) 933 MHz fCK for 1866 MB/sec/pin 8 independent internal bank Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 Programmable Additive Latency: 0, CL - 2, or CL - 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm +/- 1%) On Di |
| Verzendgewicht | 0.05 kg |
| Pakketafmetingen | 151 × 56 × 14 mm |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Yes, it is an unbuffered DIMM built to the JEDEC 1.5 V standard, so it installs in any desktop DDR3 slot that accepts 1866 MHz memory.
They show CAS latency of 10 cycles with 11-cycle RAS-to-CAS and RAS precharge delays, giving low access latency at the rated 1866 MHz data rate.
The module supports JEDEC 1.5 V operation (1.425 V–1.575 V range); 1.35 V is not a validated voltage for this part.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?