Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Two blue DDR3 desktop memory modules with asymmetric aluminum heat spreaders and diamond-cut finish

HyperX

HyperX FURY 16GB (2 x 8GB) DDR3 1866 CL10 HX318C10FK2/16

SKU CH-VS6R-GWJPJ MPN HX318C10FK2/16

A 16 GB dual-channel DDR3 kit running at 1866 MHz with CL10 timings and a blue heat spreader

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL10
  • Timing10-11-10
  • Voltage1.50V
  • ECCNo

Capacity 16GB (2 x 8GB)

  • 8GB
  • 16GB (2 x 8GB)
  • Auto-overclocking up to 1866 MHz for faster plug-and-play performance
  • Low 1.35 V option reduces power draw and heat
  • CL10 timing at 1866 MHz delivers responsive system speed
  • Blue asymmetric heat spreader improves cooling and matches build aesthetics
  • Dual-channel 16 GB kit (2 × 8 GB) doubles memory bandwidth

HyperX FURY 16GB DDR3 Kit

The HyperX FURY kit provides 16 GB of desktop memory across two 8 GB modules. It runs at DDR3 1866 with CL10 latency for responsive performance in gaming and high-performance workloads. The blue aluminum heat spreader helps manage thermals during sustained use.

Plug-and-play DDR3 installation

The modules auto-overclock to 1866 MHz on compatible platforms, so no manual BIOS tuning is required. They operate at the JEDEC standard 1.5 V (1.425 V – 1.575 V) range, and low-voltage 1.35 V operation is supported where the platform allows. Ensure the motherboard accepts DDR3 DIMMs and enable XMP or the equivalent automatic profile if the rated speed does not apply by default.

16 GB dual-channel capacity

The 2 × 8 GB configuration fills two slots for dual-channel bandwidth, which suits modern games, content creation and multitasking. Headroom remains for adding another kit if the board has four slots and the memory controller supports the total population. Beyond 16 GB, workloads such as heavy virtualization or large dataset processing may require higher density modules or a platform upgrade.

Puntos fuertes

  • Auto-overclocking up to 1866 MHz for faster plug-and-play performance
  • Low 1.35 V option reduces power draw and heat
  • CL10 timing at 1866 MHz delivers responsive system speed
  • Blue asymmetric heat spreader improves cooling and matches build aesthetics
  • Dual-channel 16 GB kit (2 × 8 GB) doubles memory bandwidth

Especificaciones

BrandHyperX
SeriesFURY
ModelHX318C10FK2/16
Capacity16GB (2 x 8GB)
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL10
Timing10-11-10
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlue
Heat SpreaderYes
FeaturesJEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
933MHz fCK for 1866Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL-2, or CL-1 clock
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm +/- 1%)
On Die Ter
Recommend UseHigh Performance or Gaming Memory
Peso de envío0.11 kg
Dimensiones del paquete151 × 84 × 13 mm

Otras versiones de este modelo

1 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will this kit fit a motherboard with four DDR3 slots running dual-channel?

Yes, the 2 x 8 GB dual-channel kit is designed for DDR3 motherboards; populate the two slots of the same colour for dual-channel operation.

Does the 1.5 V rating work with boards that only support 1.35 V low-voltage DDR3?

The modules follow the JEDEC 1.5 V standard (1.425 V – 1.575 V range); they are not rated for 1.35 V operation.

What do the timing numbers 10-11-10 mean for real-world use?

CAS latency 10, tRCD 11 and tRP 10 at 1866 MHz give low latency for gaming and high-performance desktop workloads.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.