HyperX
HyperX FURY 16GB (2 x 8GB) DDR3 1866 CL10 HX318C10FK2/16
A 16 GB dual-channel DDR3 kit running at 1866 MHz with CL10 timings and a blue heat spreader
- Capacity16GB (2 x 8GB)
- SpeedDDR3 1866 (PC3 14900)
- CAS LatencyCL10
- Timing10-11-10
- Voltage1.50V
- ECCNo
Capacity 16GB (2 x 8GB)
- 8GB
- 16GB (2 x 8GB)
- Auto-overclocking up to 1866 MHz for faster plug-and-play performance
- Low 1.35 V option reduces power draw and heat
- CL10 timing at 1866 MHz delivers responsive system speed
- Blue asymmetric heat spreader improves cooling and matches build aesthetics
- Dual-channel 16 GB kit (2 × 8 GB) doubles memory bandwidth
HyperX FURY 16GB DDR3 Kit
The HyperX FURY kit provides 16 GB of desktop memory across two 8 GB modules. It runs at DDR3 1866 with CL10 latency for responsive performance in gaming and high-performance workloads. The blue aluminum heat spreader helps manage thermals during sustained use.
Plug-and-play DDR3 installation
The modules auto-overclock to 1866 MHz on compatible platforms, so no manual BIOS tuning is required. They operate at the JEDEC standard 1.5 V (1.425 V – 1.575 V) range, and low-voltage 1.35 V operation is supported where the platform allows. Ensure the motherboard accepts DDR3 DIMMs and enable XMP or the equivalent automatic profile if the rated speed does not apply by default.
16 GB dual-channel capacity
The 2 × 8 GB configuration fills two slots for dual-channel bandwidth, which suits modern games, content creation and multitasking. Headroom remains for adding another kit if the board has four slots and the memory controller supports the total population. Beyond 16 GB, workloads such as heavy virtualization or large dataset processing may require higher density modules or a platform upgrade.
주요 특징
- Auto-overclocking up to 1866 MHz for faster plug-and-play performance
- Low 1.35 V option reduces power draw and heat
- CL10 timing at 1866 MHz delivers responsive system speed
- Blue asymmetric heat spreader improves cooling and matches build aesthetics
- Dual-channel 16 GB kit (2 × 8 GB) doubles memory bandwidth
사양
| Brand | HyperX |
|---|---|
| Series | FURY |
| Model | HX318C10FK2/16 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL10 |
| Timing | 10-11-10 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Blue |
| Heat Spreader | Yes |
| Features | JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply VDDQ = 1.5V (1.425V ~ 1.575V) 933MHz fCK for 1866Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 Programmable Additive Latency: 0, CL-2, or CL-1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm +/- 1%) On Die Ter |
| Recommend Use | High Performance or Gaming Memory |
| 배송 무게 | 0.11 kg |
| 포장 크기 | 151 × 84 × 13 mm |
이 모델의 다른 버전
같은 라인업에서 1개 더
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
이 상품에 대한 질문
Will this kit fit a motherboard with four DDR3 slots running dual-channel?
Yes, the 2 x 8 GB dual-channel kit is designed for DDR3 motherboards; populate the two slots of the same colour for dual-channel operation.
Does the 1.5 V rating work with boards that only support 1.35 V low-voltage DDR3?
The modules follow the JEDEC 1.5 V standard (1.425 V – 1.575 V range); they are not rated for 1.35 V operation.
What do the timing numbers 10-11-10 mean for real-world use?
CAS latency 10, tRCD 11 and tRP 10 at 1866 MHz give low latency for gaming and high-performance desktop workloads.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278038BTC
재고 있음
