暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Blue HyperX FURY DDR3 desktop memory module with asymmetric heat spreader

HyperX

HyperX FURY HX318C10F/8 8GB DDR3 1866 desktop RAM

SKU CH-K64P-4DNQG MPN HX318C10F/8

8GB DDR3 desktop module running at 1866MHz with CL10 timing and a blue asymmetric heat spreader

  • Capacity8GB
  • SpeedDDR3 1866
  • CAS LatencyCL10
  • Timing10-11-10
  • Voltage1.50V
  • ECCNo

Capacity 8GB

  • 8GB DDR3 1866 capacity for responsive multitasking
  • CL10 10-11-10 timing delivers low-latency performance
  • 5V JEDEC standard voltage ensures broad compatibility
  • Asymmetric heat spreader provides stylish thermal management
  • Auto-overclocking up to 1866MHz enables plug-and-play speed

HyperX FURY 8GB DDR3 1866 Memory

This HyperX FURY module is an 8GB DDR3 desktop memory kit rated for 1866MHz speed. It operates at a standard 1.50V voltage with CL10 latency timings of 10-11-10. The blue asymmetric heat spreader aids thermal dissipation for stable operation.

Suits DDR3 system upgrades and replacements

This unbuffered, non-ECC DIMM fits standard desktop motherboards with DDR3 slots supporting 1866MHz speeds. It works with compatible Intel and AMD platforms using JEDEC standard voltages. Systems requiring ECC, registered memory, or a different DDR generation should select an alternative module.

Key spec: DDR3 1866MHz CL10 at 1.50V

The decisive specification is the DDR3 1866MHz speed combined with CL10 timing at 1.50V. Verify your motherboard supports this frequency and voltage before purchase. Automatic overclocking functionality simplifies installation for plug-and-play performance.

特長

  • 8GB DDR3 1866 capacity for responsive multitasking
  • CL10 10-11-10 timing delivers low-latency performance
  • 5V JEDEC standard voltage ensures broad compatibility
  • Asymmetric heat spreader provides stylish thermal management
  • Auto-overclocking up to 1866MHz enables plug-and-play speed

仕様

BrandHyperX
SeriesFURY
ModelHX318C10F/8
Capacity8GB
SpeedDDR3 1866
CAS LatencyCL10
Timing10-11-10
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ColorBlue
Heat SpreaderYes
FeaturesJEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
933 MHz fCK for 1866 MB/sec/pin
8 independent internal bank
Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm +/- 1%)
On Di
配送重量0.05 kg
梱包サイズ151 × 56 × 14 mm

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 8 GB DDR3 module fit a standard desktop DIMM slot?

Yes, it is an unbuffered DIMM built to the JEDEC 1.5 V standard, so it installs in any desktop DDR3 slot that accepts 1866 MHz memory.

What do the timing figures 10-11-10 mean for real-world use?

They show CAS latency of 10 cycles with 11-cycle RAS-to-CAS and RAS precharge delays, giving low access latency at the rated 1866 MHz data rate.

Can I run this stick at 1.35 V to reduce heat?

The module supports JEDEC 1.5 V operation (1.425 V–1.575 V range); 1.35 V is not a validated voltage for this part.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。