Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black metal bracket with open sides and screw holes, holds a 2.5 inch drive in a 3.5 inch bay

LORDWORLD

LORDWORLD 2.5" to 3.5" SATA SSD HDD Adapter Bracket EZConvert Lite MB882SP-1S-1B

SKU CH-ZA54-R0X49

Converts a 2.5 SATA HDD or SSD to fit a 3.5 drive bay with screw-less installation and airflow vents

  • Fits 2.5 inch drives into 3.5 inch bays
  • Supports SATA 6 Gbps and SAS 3.0 12 Gbps speeds
  • Accepts 7 mm to 9.5 mm drive heights
  • Screw-less design enables fast tool-free installation
  • Vented metal body aids cooling and protects the drive

2.5 to 3.5 inch SATA Adapter Bracket

The Lordworld EZConvert Lite MB882SP-1S-1B converts a 2.5 inch SATA SSD or HDD into a 3.5 inch form factor for installation in a standard internal drive bay. It accepts drives between 7mm and 9.5mm in height. A screw-less mechanism allows quick insertion and removal without tools.

Suitable for desktop builders and upgraders

This bracket suits anyone fitting a laptop-size SATA drive into a desktop chassis or server bay. It supports SATA 6Gbps and SAS 3.0 12Gbps single-channel operation. Builders needing to mount drives thicker than 9.5mm or requiring a tray for 3.5 inch drives should look elsewhere.

SATA and SAS 12Gbps single-channel support

The adapter passes through SATA 6Gbps and SAS 3.0 12Gbps signals without conversion. Airflow vents assist heat dissipation while the shockproof frame protects the installed drive. No other interface or protocol is supported.

Priekšrocības

  • Fits 2.5 inch drives into 3.5 inch bays
  • Supports SATA 6 Gbps and SAS 3.0 12 Gbps speeds
  • Accepts 7 mm to 9.5 mm drive heights
  • Screw-less design enables fast tool-free installation
  • Vented metal body aids cooling and protects the drive

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

Will a 2.5" SATA SSD fit in my existing 3.5" drive bay using this bracket?

The bracket converts a 2.5" SATA HDD or SSD into a 3.5" form factor for standard 3.5" SATA drive bay installation.

How can I verify the adapter is passing data at full speed after installation?

The adapter supports SATA 6Gbps and SAS 3.0 12Gbps single channel; check your system BIOS or OS drive properties to confirm the negotiated link speed.

Does the package include mounting screws for the 3.5" bay or do I need my own?

The screw-less design secures the 2.5" drive (7mm-9.5mm height) inside the bracket; you will need your own screws to mount the bracket into the 3.5" bay.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.