Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black metal bracket with open sides and screw holes, holds a 2.5 inch drive in a 3.5 inch bay

LORDWORLD

LORDWORLD 2.5" to 3.5" SATA SSD HDD Adapter Bracket EZConvert Lite MB882SP-1S-1B

SKU CH-ZA54-R0X49

Converts a 2.5 SATA HDD or SSD to fit a 3.5 drive bay with screw-less installation and airflow vents

  • Fits 2.5 inch drives into 3.5 inch bays
  • Supports SATA 6 Gbps and SAS 3.0 12 Gbps speeds
  • Accepts 7 mm to 9.5 mm drive heights
  • Screw-less design enables fast tool-free installation
  • Vented metal body aids cooling and protects the drive

2.5 to 3.5 inch SATA Adapter Bracket

The Lordworld EZConvert Lite MB882SP-1S-1B converts a 2.5 inch SATA SSD or HDD into a 3.5 inch form factor for installation in a standard internal drive bay. It accepts drives between 7mm and 9.5mm in height. A screw-less mechanism allows quick insertion and removal without tools.

Suitable for desktop builders and upgraders

This bracket suits anyone fitting a laptop-size SATA drive into a desktop chassis or server bay. It supports SATA 6Gbps and SAS 3.0 12Gbps single-channel operation. Builders needing to mount drives thicker than 9.5mm or requiring a tray for 3.5 inch drives should look elsewhere.

SATA and SAS 12Gbps single-channel support

The adapter passes through SATA 6Gbps and SAS 3.0 12Gbps signals without conversion. Airflow vents assist heat dissipation while the shockproof frame protects the installed drive. No other interface or protocol is supported.

Prednosti

  • Fits 2.5 inch drives into 3.5 inch bays
  • Supports SATA 6 Gbps and SAS 3.0 12 Gbps speeds
  • Accepts 7 mm to 9.5 mm drive heights
  • Screw-less design enables fast tool-free installation
  • Vented metal body aids cooling and protects the drive

Špecifikácie

BrandLORDWORLD

Otázky k tomuto produktu

Will a 2.5" SATA SSD fit in my existing 3.5" drive bay using this bracket?

The bracket converts a 2.5" SATA HDD or SSD into a 3.5" form factor for standard 3.5" SATA drive bay installation.

How can I verify the adapter is passing data at full speed after installation?

The adapter supports SATA 6Gbps and SAS 3.0 12Gbps single channel; check your system BIOS or OS drive properties to confirm the negotiated link speed.

Does the package include mounting screws for the 3.5" bay or do I need my own?

The screw-less design secures the 2.5" drive (7mm-9.5mm height) inside the bracket; you will need your own screws to mount the bracket into the 3.5" bay.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.