저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black metal bracket with open sides and screw holes, holds a 2.5 inch drive in a 3.5 inch bay

LORDWORLD

LORDWORLD 2.5" to 3.5" SATA SSD HDD Adapter Bracket EZConvert Lite MB882SP-1S-1B

SKU CH-ZA54-R0X49

Converts a 2.5 SATA HDD or SSD to fit a 3.5 drive bay with screw-less installation and airflow vents

  • Fits 2.5 inch drives into 3.5 inch bays
  • Supports SATA 6 Gbps and SAS 3.0 12 Gbps speeds
  • Accepts 7 mm to 9.5 mm drive heights
  • Screw-less design enables fast tool-free installation
  • Vented metal body aids cooling and protects the drive

2.5 to 3.5 inch SATA Adapter Bracket

The Lordworld EZConvert Lite MB882SP-1S-1B converts a 2.5 inch SATA SSD or HDD into a 3.5 inch form factor for installation in a standard internal drive bay. It accepts drives between 7mm and 9.5mm in height. A screw-less mechanism allows quick insertion and removal without tools.

Suitable for desktop builders and upgraders

This bracket suits anyone fitting a laptop-size SATA drive into a desktop chassis or server bay. It supports SATA 6Gbps and SAS 3.0 12Gbps single-channel operation. Builders needing to mount drives thicker than 9.5mm or requiring a tray for 3.5 inch drives should look elsewhere.

SATA and SAS 12Gbps single-channel support

The adapter passes through SATA 6Gbps and SAS 3.0 12Gbps signals without conversion. Airflow vents assist heat dissipation while the shockproof frame protects the installed drive. No other interface or protocol is supported.

주요 특징

  • Fits 2.5 inch drives into 3.5 inch bays
  • Supports SATA 6 Gbps and SAS 3.0 12 Gbps speeds
  • Accepts 7 mm to 9.5 mm drive heights
  • Screw-less design enables fast tool-free installation
  • Vented metal body aids cooling and protects the drive

사양

BrandLORDWORLD

이 상품에 대한 질문

Will a 2.5" SATA SSD fit in my existing 3.5" drive bay using this bracket?

The bracket converts a 2.5" SATA HDD or SSD into a 3.5" form factor for standard 3.5" SATA drive bay installation.

How can I verify the adapter is passing data at full speed after installation?

The adapter supports SATA 6Gbps and SAS 3.0 12Gbps single channel; check your system BIOS or OS drive properties to confirm the negotiated link speed.

Does the package include mounting screws for the 3.5" bay or do I need my own?

The screw-less design secures the 2.5" drive (7mm-9.5mm height) inside the bracket; you will need your own screws to mount the bracket into the 3.5" bay.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.