Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black metal bracket with open sides and screw holes, holds a 2.5 inch drive in a 3.5 inch bay

LORDWORLD

LORDWORLD 2.5" to 3.5" SATA SSD HDD Adapter Bracket EZConvert Lite MB882SP-1S-1B

SKU CH-ZA54-R0X49

Converts a 2.5 SATA HDD or SSD to fit a 3.5 drive bay with screw-less installation and airflow vents

  • Fits 2.5 inch drives into 3.5 inch bays
  • Supports SATA 6 Gbps and SAS 3.0 12 Gbps speeds
  • Accepts 7 mm to 9.5 mm drive heights
  • Screw-less design enables fast tool-free installation
  • Vented metal body aids cooling and protects the drive

2.5 to 3.5 inch SATA Adapter Bracket

The Lordworld EZConvert Lite MB882SP-1S-1B converts a 2.5 inch SATA SSD or HDD into a 3.5 inch form factor for installation in a standard internal drive bay. It accepts drives between 7mm and 9.5mm in height. A screw-less mechanism allows quick insertion and removal without tools.

Suitable for desktop builders and upgraders

This bracket suits anyone fitting a laptop-size SATA drive into a desktop chassis or server bay. It supports SATA 6Gbps and SAS 3.0 12Gbps single-channel operation. Builders needing to mount drives thicker than 9.5mm or requiring a tray for 3.5 inch drives should look elsewhere.

SATA and SAS 12Gbps single-channel support

The adapter passes through SATA 6Gbps and SAS 3.0 12Gbps signals without conversion. Airflow vents assist heat dissipation while the shockproof frame protects the installed drive. No other interface or protocol is supported.

Pluspunten

  • Fits 2.5 inch drives into 3.5 inch bays
  • Supports SATA 6 Gbps and SAS 3.0 12 Gbps speeds
  • Accepts 7 mm to 9.5 mm drive heights
  • Screw-less design enables fast tool-free installation
  • Vented metal body aids cooling and protects the drive

Specificaties

BrandLORDWORLD

Vragen over dit artikel

Will a 2.5" SATA SSD fit in my existing 3.5" drive bay using this bracket?

The bracket converts a 2.5" SATA HDD or SSD into a 3.5" form factor for standard 3.5" SATA drive bay installation.

How can I verify the adapter is passing data at full speed after installation?

The adapter supports SATA 6Gbps and SAS 3.0 12Gbps single channel; check your system BIOS or OS drive properties to confirm the negotiated link speed.

Does the package include mounting screws for the 3.5" bay or do I need my own?

The screw-less design secures the 2.5" drive (7mm-9.5mm height) inside the bracket; you will need your own screws to mount the bracket into the 3.5" bay.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.