暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black metal bracket with open sides and screw holes, holds a 2.5 inch drive in a 3.5 inch bay

LORDWORLD

LORDWORLD 2.5" to 3.5" SATA SSD HDD Adapter Bracket EZConvert Lite MB882SP-1S-1B

SKU CH-ZA54-R0X49

Converts a 2.5 SATA HDD or SSD to fit a 3.5 drive bay with screw-less installation and airflow vents

  • Fits 2.5 inch drives into 3.5 inch bays
  • Supports SATA 6 Gbps and SAS 3.0 12 Gbps speeds
  • Accepts 7 mm to 9.5 mm drive heights
  • Screw-less design enables fast tool-free installation
  • Vented metal body aids cooling and protects the drive

2.5 to 3.5 inch SATA Adapter Bracket

The Lordworld EZConvert Lite MB882SP-1S-1B converts a 2.5 inch SATA SSD or HDD into a 3.5 inch form factor for installation in a standard internal drive bay. It accepts drives between 7mm and 9.5mm in height. A screw-less mechanism allows quick insertion and removal without tools.

Suitable for desktop builders and upgraders

This bracket suits anyone fitting a laptop-size SATA drive into a desktop chassis or server bay. It supports SATA 6Gbps and SAS 3.0 12Gbps single-channel operation. Builders needing to mount drives thicker than 9.5mm or requiring a tray for 3.5 inch drives should look elsewhere.

SATA and SAS 12Gbps single-channel support

The adapter passes through SATA 6Gbps and SAS 3.0 12Gbps signals without conversion. Airflow vents assist heat dissipation while the shockproof frame protects the installed drive. No other interface or protocol is supported.

特長

  • Fits 2.5 inch drives into 3.5 inch bays
  • Supports SATA 6 Gbps and SAS 3.0 12 Gbps speeds
  • Accepts 7 mm to 9.5 mm drive heights
  • Screw-less design enables fast tool-free installation
  • Vented metal body aids cooling and protects the drive

仕様

BrandLORDWORLD

この商品に関する質問

Will a 2.5" SATA SSD fit in my existing 3.5" drive bay using this bracket?

The bracket converts a 2.5" SATA HDD or SSD into a 3.5" form factor for standard 3.5" SATA drive bay installation.

How can I verify the adapter is passing data at full speed after installation?

The adapter supports SATA 6Gbps and SAS 3.0 12Gbps single channel; check your system BIOS or OS drive properties to confirm the negotiated link speed.

Does the package include mounting screws for the 3.5" bay or do I need my own?

The screw-less design secures the 2.5" drive (7mm-9.5mm height) inside the bracket; you will need your own screws to mount the bracket into the 3.5" bay.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。