SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Maxtor
A 300GB, 7200 RPM SATA 1.5Gb/s desktop drive with 16MB cache and native command queuing
This Maxtor DiamondMax 10 drive delivers 300GB of storage on a SATA 1.5Gb/s interface. It spins at 7200 RPM with a 16MB cache and 9ms average seek time. The 3.5-inch form factor fits standard desktop bays. It suits builders restoring or expanding older systems that require a native SATA 1.5Gb/s connection.
A fluid dynamic bearing motor reduces acoustic output during normal operation. The drive includes a Shock Protection System and a Data Protection System to guard against physical impacts and data errors. Native command queuing helps optimise the order of read and write requests. The unit is RoHS compliant.
This drive serves as a direct replacement for a failed 3.5-inch SATA 1.5Gb/s hard drive in a desktop PC. It upgrades capacity over smaller drives of the same interface and era. The jump is worthwhile when the host system only supports SATA 1.5Gb/s and a bare drive without cables is preferred.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax 10 |
| Model | 6L300S0 |
| Packaging | Bare Drive |
| Interface | SATA 1.5Gb/s |
| Capacity | 300GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 9ms |
| Average Latency | 4.17ms |
| Features | Native command queuing Fluid dynamic bearing motor for quiet operation RoHS compliant Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| Sūtījuma svars | 0.68 kg |
| Sūtījuma izmēri | 203 × 152 × 51 mm |
Mount the drive in a 3.5" bay using four screws, connect the SATA data cable to a SATA port on the motherboard and attach a SATA power connector from the PSU; the step often missed is enabling the SATA port in BIOS so the OS can detect the 300GB volume.
No routine maintenance is required for the sealed mechanism; listen for new clicking or grinding noises from the fluid dynamic bearing motor and run SMART checks periodically — if reallocated sectors rise or seek errors appear, replace the drive.
The SATA 1.5Gb/s interface caps maximum sustained transfer rate, so sequential reads and writes will hit that ceiling before the platters or cache become the bottleneck.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?